SLSEOS · official manufacturer imageEOS FORMIGA P 110 FDR
Polymer powder-bed system using CO laser sintering.
Source reviews: 2026-10-17.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | FORMIGA P 110 |
| Process | SLS |
| Build envelope (X × Y × Z) | 200 × 250 × 330 mm |
| Nominal box volume | 16.50 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Polymer powder |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Laser Type | CO |
|---|---|
| Laser Count | 1 |
| Laser Power Per Unit (W) | 40 |
Configuration and workflow
The FDR configuration uses carbon-monoxide lasers and is documented separately from the similarly named standard CO₂ system. Use its own material/process parameters.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: FORMIGA P 110 · Listing status only
Explore EOS through the generationsRead this with the specifications
The cited manufacturer documentation identifies this configuration; regional supply and stock were not established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
