PolyJetManufacturer image: StratasysStratasys J850 Digital Anatomy
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | 490 × 390 × 200 mm |
| Nominal box volume | 38.22 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 1400 × 1260 × 1100 |
|---|---|
| Machine weight (kg) | 430 |
| Layer Heights (µm) | 14, 27, 54 Mode-specific nominal layer settings, not dimensional accuracy; material compatibility varies. |
| Support Materials | SUP705B, SUP706B or GelMatrix according to workflow |
| Software | GrabCAD Print Digital Anatomy; Pro/Creator optional |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–120 VAC / 13.5 A or 220–240 VAC / 7 A, single phase, 50/60 Hz |
| Maximum Simultaneous Model Materials | 7 Maximum in applicable print mode, not every speed mode. |
| Material Cabinet Dimensions (mm) | 670 × 1170 × 640 |
| Material Cabinet Weight (kg) | 152 |
Materials and intended workflow
J850 Digital Anatomy uses GelMatrix, TissueMatrix, BoneMatrix and RadioMatrix families to construct models with different tactile or imaging behavior. GrabCAD Print Digital Anatomy prepares these combinations; Pro and Digital Anatomy Creator are separately listed options.
Geometry and print modes
The 490 × 390 × 200 mm envelope supports seven-base-material High Quality and High Mix modes, with reduced material counts in faster modes. The exact catalog record lists 54 µm for Super High Speed, rather than the 55 µm used by some other J850 configurations.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
