PolyJetManufacturer image: StratasysStratasys J5 MediJet
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 651 × 661 × 1511 |
|---|---|
| Machine weight (kg) | 228 |
| Layer Heights (µm) | 18.75 Mode-specific nominal layer settings, not dimensional accuracy; material compatibility varies. |
| Support Materials | SUP710, waterjet removal |
| Software | GrabCAD |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–240 VAC, 10 A, single phase, 50/60 Hz |
| Tray Area (cm²) | 1174 |
| Maximum Single Part Dimensions (mm) | 140 × 200 × 190 |
Materials and intended workflow
J5 MediJet targets anatomical models and surgical-guide workflows, using rigid and flexible medical modeling materials. Biocompatibility or sterilization claims belong to particular materials and validated processes, rather than every item produced by the printer.
Geometry and print modes
The tray area is 1174 cm² and maximum part size is 140 × 200 × 190 mm. Its listed High Quality mode uses 18.75 µm layers. Rigid-part deviation is stated at one sigma, or 67% of parts: ±150 µm below 100 mm and ±0.15% for larger dimensions.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
