PolyJetManufacturer image: StratasysStratasys J35 Pro
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 651 × 661 × 774 |
|---|---|
| Machine weight (kg) | 98 |
| Layer Heights (µm) | 18.75 Mode-specific nominal layer settings, not dimensional accuracy; material compatibility varies. |
| Support Materials | SUP710S or WSS150, as material-compatible |
| Software | GrabCAD Print; SDK |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–240 VAC, 10 A, single phase, 50/60 Hz |
| Maximum Simultaneous Model Materials | 3 Maximum in applicable print mode, not every speed mode. |
| Tray Area (cm²) | 1174 |
| Print Height (mm) | 158 |
| Maximum Model Height (mm) | 155 |
Materials and intended workflow
J35 Pro is a three-material PolyJet platform for combining different mechanical and optical properties in prototypes. The manufacturer distinguishes model resins from support consumables such as SUP710S and WSS150.
Geometry and print modes
Its tray provides 1174 cm² of area, with 158 mm stated print height but a 155 mm maximum model height. These measurements should not be turned into an invented rectangular build width and depth. Rigid-part deviation is reported separately at one- and two-sigma confidence levels.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
