PolyJetManufacturer image: StratasysStratasys J5 Digital Anatomy
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 651 × 661 × 1511 |
|---|---|
| Machine weight (kg) | 228 |
| Support Materials | SUP710S; WSS150 incompatible with Digital Anatomy materials |
| Software | GrabCAD Print |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–240 VAC, 10 A, single phase, 50/60 Hz |
| Maximum Single Part Dimensions (mm) | 140 × 200 × 190 |
| Minimum layer height (µm) | 18 Rounded manufacturer minimum, not an exact layer setting for all modes. |
Materials and intended workflow
J5 Digital Anatomy uses tissue, bone, gel and radiopaque simulation materials for anatomical models. Those names describe simulation functions and do not establish suitability as permanent implanted materials.
Geometry and print modes
The maximum individual part is 140 × 200 × 190 mm. Its mode list includes anatomy-compatible High Quality Speed, Long Print and High Speed configurations. The catalog explicitly excludes WSS150 compatibility with Digital Anatomy materials, despite that support appearing on other PolyJet platforms.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
