PolyJetManufacturer image: StratasysStratasys DentaJet XL
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 651 × 661 × 1511 |
|---|---|
| Machine weight (kg) | 199 |
| Layer Heights (µm) | 20.625, 61.875 Mode-specific nominal layer settings, not dimensional accuracy; material compatibility varies. |
| Support Materials | SUP711, waterjet removal |
| Software | GrabCAD Print |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–240 VAC, 10 A, single phase, 50/60 Hz |
| Maximum Simultaneous Model Materials | 2 Maximum in applicable print mode, not every speed mode. |
| Tray Area (cm²) | 1174 |
| Maximum Single Part Dimensions (mm) | 140 × 200 × 190 |
Materials and intended workflow
DentaJet XL runs two model materials simultaneously and is aimed at dental-model, guide and aligner workflows. The catalog’s explicit material table lists MED610-DSG, MED620S and VeroWhite; broader promotional references are not treated as added validated workflows.
Geometry and print modes
Its 1174 cm² tray area is not a rectangular build box. The maximum single part is 140 × 200 × 190 mm. The 61.875 µm Super High Speed mode is limited to aligner arches; the 20.625 µm mode describes a different operating configuration.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
