PolyJetManufacturer image: StratasysStratasys J55 Prime
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 651 × 661 × 1511 |
|---|---|
| Machine weight (kg) | 228 |
| Layer Heights (µm) | 18.75 Mode-specific nominal layer settings, not dimensional accuracy; material compatibility varies. |
| Support Materials | SUP710S or WSS150, as material-compatible |
| Software | GrabCAD Print; SDK |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–240 VAC, 10 A, single phase, 50/60 Hz |
| Maximum Simultaneous Model Materials | 5 Maximum in applicable print mode, not every speed mode. |
| Tray Area (cm²) | 1174 |
| Print Height (mm) | 190 |
Materials and intended workflow
J55 Prime combines five materials on a rotating tray for full-color and mixed-property prototypes. Current material examples include DraftWhite, Digital ABS Plus, VeroUltra and Elastico/VeroMagenta.
Geometry and print modes
The 1174 cm² tray and 190 mm print height describe a circular-platform system. The published 18 µm minimum is rounded; the explicit HQ mode is 18.75 µm. One- and two-sigma rigid-part deviation figures are distinct statistical specifications, not layer-resolution claims.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
