SLAManufacturer image: ZRapid TechZRapid Tech iSLA300
Laser stereolithography printer with a heated resin vat.
Source reviews: 2026-10-17.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | iSLA |
| Process | SLA Sources: iSLA300 specifications |
| Build envelope (X × Y × Z) | 300 × 300 × 200 mm The manufacturer states that contract specifications govern; current availability was not independently established. Sources: iSLA300 specifications |
| Nominal box volume | 18.00 L · calculated from the envelope The manufacturer states that contract specifications govern; current availability was not independently established. Sources: iSLA300 specifications |
| Enclosure | Not verified |
| Materials cited in this profile | Photopolymer resin |
| Manufacturer listing status | Manufacturer documentation verified; availability not established |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Laser Wavelength (nm) | 354.7 Sources: iSLA300 specifications |
|---|---|
| Layer Thickness (mm) | 0.05–0.15 depending on mode Sources: iSLA300 specifications |
| Software | iSLA ZERO 5.0; 3dLayer Sources: iSLA300 specifications |
Design and workflow
The official table lists vacuum recoating and several build modes. CLI, SLC and STL are accepted.
Configuration and evidence
The manufacturer states that contract specifications govern; current availability was not independently established.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: iSLA · Listing status only
Explore ZRapid Tech through the generationsRead this with the specifications
The manufacturer states that contract specifications govern; current availability was not independently established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
