3Dprintsy.
Home / Printers / Vision Miner / 22 IDEX v4
Vision Miner 22 IDEX v4 — official product imageFFFManufacturer image: Vision Miner
Vision Miner

Vision Miner 22 IDEX v4

FFFIndustrialDimensions sourced

High-temperature independent dual-extrusion printer with a heated chamber and open material system.

Official product

Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.

The machine at a glance

The details that matter.

Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.

Core specifications for Vision Miner 22 IDEX v4
Introduction yearNot verified
Model family22 IDEX v4
ProcessFFF
Build envelope (X × Y × Z)350 × 350 × 450 mm
Nominal box volume55.13 L · calculated from the envelope
EnclosureEnclosed
Sources: Vision Miner 22 IDEX v4 — official product information
Maximum nozzle temperature500 °C
Sources: Vision Miner 22 IDEX v4 — official product information
Materials cited in this profilePEEK, PEKK, PEI, Nylon, PC, ABS
Manufacturer listing statusOfficial documentation available
Regional stock and priceCheck the manufacturer
Market groupingIndustrial · editorial grouping

Technical specifications

Additional technical specifications for 22 IDEX v4
Chamber Temperature (°C)100

Headline specifies 100°C; body also says 100°C+, without a definite higher maximum.

Sources: Vision Miner 22 IDEX v4 — official product information
Extruder Count2
Sources: Vision Miner 22 IDEX v4 — official product information
Filament diameter (mm)1.75
Sources: Vision Miner 22 IDEX v4 — official product information
Bed Temperature (°C)200
Sources: Vision Miner 22 IDEX v4 — official product information
Z Motor Count3
Sources: Vision Miner 22 IDEX v4 — official product information
XY Motor Count4
Sources: Vision Miner 22 IDEX v4 — official product information
ControllerDuet 3 with RepRapFirmware
Sources: Vision Miner 22 IDEX v4 — official product information
ExtrudersBondtech LGX
Sources: Vision Miner 22 IDEX v4 — official product information
HotendsSlice Engineering
Sources: Vision Miner 22 IDEX v4 — official product information
Included Nozzle Diameter (mm)0.4
Sources: Vision Miner 22 IDEX v4 — official product information
Included Nozzle MaterialHardened steel
Sources: Vision Miner 22 IDEX v4 — official product information
Air FiltrationHEPA and activated carbon
Sources: Vision Miner 22 IDEX v4 — official product information
External Extraction Connection2-inch hose connections
Sources: Vision Miner 22 IDEX v4 — official product information
Tool AlignmentAutomatic XY alignment probe
Sources: Vision Miner 22 IDEX v4 — official product information
Build PlateCarbon fiber

Standard-package listing; additional plates vary by bundle.

Sources: Vision Miner 22 IDEX v4 — official product information
Model notes · 01

Independent high-temperature heads

Both heads are rated to 500°C. The IDEX arrangement supports two materials, duplicate parts or mirrored parts, with an actively heated enclosure.

Sources: Vision Miner 22 IDEX v4 — official product information
Model notes · 02

Calibration and bundles

Three Z motors level the bed and four XY motors square the gantry. The standard package differs from maintenance and production bundles, which add spares, dryers or vacuum equipment.

Sources: Vision Miner 22 IDEX v4 — official product information
A place in the lineage

Explore the model family.

Introduction year has not been established from the cited evidence.

Family: 22 IDEX v4 · Listing status only

Explore Vision Miner through the generations

Read this with the specifications

Official page displayed out of stock during this research; listing is not a promise of immediate availability.

A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.

Continue exploring
More FFF printers