FFFManufacturer image: StratasysStratasys Fortus 450mc
FFF system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | FFF |
| Build envelope (X × Y × Z) | 406 × 355 × 406 mm |
| Nominal box volume | 58.52 L · calculated from the envelope |
| Enclosure | Not verified |
| Maximum nozzle temperature | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 1295 × 902 × 1984 Dimensions retain the manufacturer’s published sequence; F123 family is listed as 1626 × 864 × 711 mm. |
|---|---|
| Machine weight (kg) | 601 |
| Material Bays | Two model and two support canisters; automatic changeover |
| Power Supply | 208 VAC, three phase, 18 A, 50/60 Hz |
| Software | Insight, Control Center, GrabCAD Print, GrabCAD Print Pro |
| Documented Material Examples | ASA, FDM Nylon 12CF, ULTEM 9085, Antero 800NA, FDM PA6/66-GF30-FR Examples listed in the current exact-model catalog record; not an exhaustive compatibility list. |
| Reported Dimensional Accuracy | Greater of ±0.127 mm or ±0.0015 mm/mm; Z adds up to one slice Manufacturer dimensional tolerance statement, not layer resolution; material, geometry and process conditions apply. |
| Connectivity | 10/100 Mbps Ethernet with IPv6 |
Material handling and capacity
Fortus 450mc pairs a 406 × 355 × 406 mm envelope with automatic material changeover from two model and two support bays. Its listed material examples include ULTEM 9085 and Antero 800NA for engineering applications.
Software and operating conditions
Insight and Control Center are included in the catalog specification, while OpenAM is a separately licensed option. That distinction matters when planning custom process development. The catalog does not state an ambient operating range for this record, so none is inferred.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately. Stratasys FDM is grouped under FFF for filtering.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.