PolyJetManufacturer image: StratasysStratasys J850 Pro
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | 490 × 390 × 200 mm |
| Nominal box volume | 38.22 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 1400 × 1260 × 1100 |
|---|---|
| Machine weight (kg) | 430 |
| Layer Heights (µm) | 14, 27, 55 Mode-specific nominal layer settings, not dimensional accuracy; material compatibility varies. |
| Support Materials | SUP705 waterjet; SUP706B soluble |
| Software | GrabCAD Print |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–120 VAC / 13.5 A or 220–240 VAC / 7 A, single phase, 50/60 Hz |
| Maximum Simultaneous Model Materials | 7 Maximum in applicable print mode, not every speed mode. |
| Material Cabinet Dimensions (mm) | 1119 × 656 × 637 |
| Material Cabinet Weight (kg) | 153 |
Materials and intended workflow
J850 Pro supports seven base materials in its quality and material-rich modes. Mode selection changes the available material count: High Speed uses three and Super High Speed uses one.
Geometry and print modes
The 490 × 390 × 200 mm envelope is complemented by a separate material cabinet. High Quality is 14 µm, High Mix and High Speed are 27 µm, and Super High Speed is 55 µm. Typical rigid-model deviation is ±100 µm below 100 mm, then the greater of ±200 µm or ±0.06%.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
