PolyJetManufacturer image: StratasysStratasys J826 Prime
PolyJet system in the Stratasys industrial printer range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | PolyJet |
| Build envelope (X × Y × Z) | 255 × 252 × 200 mm |
| Nominal box volume | 12.85 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Machine dimensions (mm) | 820 × 1310 × 665 |
|---|---|
| Machine weight (kg) | 234 |
| Layer Heights (µm) | 14, 27, 55 Mode-specific nominal layer settings, not dimensional accuracy; material compatibility varies. |
| Support Materials | SUP705, SUP705B or SUP706B according to workflow |
| Software | GrabCAD Print; SDK |
| Connectivity | LAN TCP/IP |
| Operating Temperature (°C) | 18–25 |
| Operating Humidity | 30–70%, non-condensing |
| Power Supply | 100–120 VAC / 13.5 A or 220–240 VAC / 7 A, single phase, 50/60 Hz |
| Maximum Simultaneous Model Materials | 7 Maximum in applicable print mode, not every speed mode. |
| Material Cabinet Dimensions (mm) | 1119 × 656 × 637 |
| Material Cabinet Weight (kg) | 153 |
Materials and intended workflow
J826 Prime brings seven-material, full-color PolyJet to a 255 × 252 × 200 mm build envelope. Its printer chassis and separate material cabinet have different dimensions and masses.
Geometry and print modes
High Quality and High Mix allow seven base materials at 14 or 27 µm; High Speed uses three at 27 µm and Super High Speed one at 55 µm. The catalog gives typical rigid-part deviation of ±100 µm below 100 mm and ±200 µm above 100 mm.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Stratasys through the generationsRead this with the specifications
Model-specific embedded specifications in the current official Stratasys catalog were reviewed on 2026-10-16. Optional accessories, material-dependent layer settings and print-mode limits are identified separately.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
