cDLMManufacturer image: EnvisionTECEnvisionTEC Envision One
Dental continuous Digital Light Manufacturing system included in SprintRay's 2025 portfolio acquisition.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Envision One |
| Process | cDLM |
| Build envelope (X × Y × Z) | 180 × 101 × 175 mm |
| Nominal box volume | 3.18 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Photopolymer resin |
| Manufacturer listing status | Unknown |
| Regional stock and price | Check the manufacturer |
| Market grouping | Professional · editorial grouping |
Technical specifications
| Manual Machine Dimensions (mm) | 406.4 × 406.4 × 775 July 2022 operations-guide dimensions; later site-preparation guide states 428 × 419.4 × 775.5 mm. |
|---|---|
| Manual Weight (kg) | 49.8 Operations-guide figure; site-preparation guide rounds to 49.90 kg. |
| Projector Resolution | 1920 × 1080 |
| Native XY Resolution (µm) | 93 |
| Enhanced XY Resolution (µm) | 60 Enhanced mode, not native projected pixel pitch or dimensional tolerance. |
| Power Supply | 110/220 VAC, 50/60 Hz, 5 A |
| Build Platform Surface | Anodized aluminum |
| Required Process Accessory | Oxygen concentrator |
| Tray Design | Domeless tray with oxygen circuit between glass and film |
| Remote Control | VNC supported |
Operations and site-preparation guides differ slightly in external dimensions and equipment mass; document-specific values remain labelled. Native and enhanced XY specifications are separate.
Oxygen-assisted separation
The Envision One cDLM uses an oxygen concentrator and a domeless material tray to reduce adhesion at the exposure interface. The concentrator is part of the required process setup.
Standard versus XL
The standard printer has a shorter Z envelope than Envision One XL. Native and enhanced XY figures remain separate, and manual-era dimensions are labelled because another official preparation guide gives slightly different external measurements.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Envision One · Historical model
Explore EnvisionTEC through the generationsRead this with the specifications
The standard Envision One cDLM operations guide verifies a 180 × 101 × 175 mm envelope. Envision One XL is a separate taller variant. These are retained historical specifications; the 2025 acquisition does not by itself verify current new-machine availability.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.