Dremel 3D20
Dremel desktop printer with a 230 x 150 x 140 mm build volume and a fully enclosed build environment.
Source reviews: 2026-11-01.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | 3D20 |
| Process | FFF |
| Build envelope (X × Y × Z) | 230 × 150 × 140 mm Sources: Dremel DigiLab FAQ |
| Nominal box volume | 4.83 L · calculated from the envelope Sources: Dremel DigiLab FAQ |
| Enclosure | Enclosed Sources: Dremel 3D Printers FAQ |
| Maximum nozzle temperature | Not verified |
| Materials cited in this profile | PLA Sources: Dremel DigiLab FAQ |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Desktop · editorial grouping |
Specifications
Dremel's FAQ gives the 3D20 a 230 x 150 x 140 mm maximum build volume and a 100 micron best resolution. It says the 3D20 builds only .g3drem files and should be used with Dremel PLA.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: 3D20 · Listing status only
Explore Dremel through the generationsRead this with the specifications
Manufacturer documentation establishes this model and the cited configuration. Retail stock and regional availability were not independently established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
