Dremel 3D40
Dremel desktop printer with a 254 x 154 x 170 mm build volume and a fully enclosed build environment.
Source reviews: 2026-11-01.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | 3D40 |
| Process | FFF |
| Build envelope (X × Y × Z) | 254 × 154 × 170 mm Sources: Dremel DigiLab FAQ |
| Nominal box volume | 6.65 L · calculated from the envelope Sources: Dremel DigiLab FAQ |
| Enclosure | Enclosed Sources: Dremel 3D Printers FAQ |
| Maximum nozzle temperature | Not verified |
| Materials cited in this profile | PLA Sources: Dremel DigiLab FAQ |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Desktop · editorial grouping |
Specifications
Dremel's FAQ gives the 3D40, 3D40 Flex and 3D45 a 254 x 154 x 170 mm maximum build volume and a 50 micron best resolution, and says the 3D40 should be used with Dremel PLA.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: 3D40 · Listing status only
Explore Dremel through the generationsRead this with the specifications
Manufacturer documentation establishes this model and the cited configuration. Retail stock and regional availability were not independently established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
