Concrete extrusionWASP · official manufacturer imageWASP Crane WASP
Construction-scale additive platform in WASP’s architectural range.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | Concrete extrusion |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Construction mixtures |
| Manufacturer listing status | Manufacturer documentation verified; availability not established |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Working Envelope | Annular reach: 8,200 mm outer diameter, 2,000 mm minimum diameter, 3,200 mm height Not a rectangular printable box: the manufacturer specifies a minimum 2,000 mm diameter exclusion. |
|---|---|
| Nozzle Diameter Options (mm) | 25, 30, 38 |
| Layer Height Options (mm) | 12, 15, 20 |
| Maximum Print Speed | 200 mm/s |
| Maximum Travel Speed | 200 mm/s |
| Maximum Acceleration | 20 mm/s² |
| Column Height (mm) | 5200 |
| Arm Length (mm) | 4300 |
| Machine weight (kg) | 700 |
| Printer Power | Less than 1.5 kW Printer only; the pump is separately listed below 2.5 kW. |
| Connectivity | Wi-Fi, USB and LAN |
| Control Software | CraneApp; G-code upload |
| Extruder | LDM XXL twin-screw |
| Included Material Equipment | Multi-material pumping system |
| Optional Material Equipment | Mixer 80 |
Modular reach and machine variant
The full Crane WASP uses an annular working region with a central exclusion zone. Multiple machines can be combined. The smaller Stand-Alone Crane is a separate 6.2 m-diameter, 1.7 m-high configuration.
Material preparation
The system processes suitable cement-, clay- and lime-based mortars. The printer section permits aggregate up to 5 mm, while the included pump specification states 4 mm; use the complete configured material path’s limit.
Printer, pump and mixer
The published 700 kg and power figure refer to the printer. Pump power and mass are separate, and the Mixer 80 is optional. WASP describes a trained site manager plus two support operators for a module.
Explore the model family.
Introduction year has not been established from the reviewed source.
Explore WASP through the generationsRead this with the specifications
Modular construction system; no fixed rectangular envelope assigned.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
