Voron Switchwire
CoreXZ printer that moves the toolhead on X and Z by belt and reuses a Prusa-style 250 x 210 mm bed.
Source reviews: 2026-11-01.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Voron Switchwire |
| Process | FFF |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Maximum nozzle temperature | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Consumer · editorial grouping |
Design
Voron Design describes the Switchwire as a CoreXZ design in which the print head is belt driven on both the X and Z axes. The frame is sized to cover the full swing of a Prusa 250 x 210 mm bed and is said to allow a natural enclosure.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Voron Switchwire · Listing status only
Explore Voron Design through the generationsRead this with the specifications
Manufacturer documentation establishes this model and the cited configuration. Retail stock and regional availability were not independently established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
Vz330
Official project rendering of the Vz330 printed configuration; individual builds vary.