LPBFManufacturer image: Velo3DVelo3D Sapphire XC 1MZ
Tall configuration of Sapphire XC with a one-meter nominal build height.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | LPBF |
| Process | LPBF |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Nickel alloys, Aluminum alloys, Copper alloys, Steel, Titanium alloys |
| Manufacturer listing status | Official documentation available; current order availability not confirmed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Laser Count | 8 |
|---|---|
| Laser Power (W) | 1000 |
| Build Diameter (mm) | 600 |
| Nominal Build Height (mm) | 1000 Usable height varies with build-plate thickness. |
| Machine dimensions (mm) | 8530 × 5000 × 4750 |
| Machine weight (kg) | 8500 Approximate manufacturer value. |
| Claimed Maximum Throughput | 800 cm³/h |
| Typical Surface Roughness Sa (µm) | 5, 15 Areal arithmetic surface roughness, not positional tolerance. |
| Recoater | Non-contact |
| Build Preparation | Flow |
| Build Traceability | Assure |
| Powder Bed Monitoring | Layer-wise 3D height mapping |
| Environment Monitoring | Oxygen, Dew point, Chamber gas flow |
Configuration and envelope
This tall 1MZ configuration has a Ø600 × 1000 mm nominal envelope and eight 1000 W lasers. Actual Z capacity varies with build-plate thickness. The manufacturer publishes separate system dimensions and weights for XC and XC 1MZ.
Monitoring and performance interpretation
Flow assigns build parameters and Assure records calibration and build performance. A non-contact recoater and layer-wise powder-height mapping support process control. The published 800 cm³/h maximum and typical 5–15 µm Sa finish describe conditional performance; roughness is not dimensional accuracy.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: LPBF · Listing status only
Explore Velo3D through the generationsRead this with the specifications
Official page describes the 1MZ height extension; usable height varies with build-plate thickness.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
