FFFUltiMaker · official manufacturer imageUltimaker 2
Ready-assembled Ultimaker generation with single extrusion and a heated build plate.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | 2013 |
|---|---|
| Model family | Ultimaker 2 |
| Process | FFF |
| Build envelope (X × Y × Z) | 223 × 223 × 205 mm Sources: Ultimaker 2 user manual EN v2.1 |
| Nominal box volume | 10.19 L · calculated from the envelope Sources: Ultimaker 2 user manual EN v2.1 |
| Enclosure | Not verified |
| Maximum nozzle temperature | 260 °C Sources: Ultimaker 2 user manual EN v2.1 |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Unknown |
| Regional stock and price | Check the manufacturer |
| Market grouping | Desktop · editorial grouping |
Technical specifications
| Filament diameter (mm) | 2.85 Sources: Ultimaker 2 user manual EN v2.1 |
|---|---|
| Nozzle Diameter (mm) | 0.4 Sources: Ultimaker 2 user manual EN v2.1 |
| Layer Presets (µm) | 40, 60, 100, 200 Sources: Ultimaker 2 user manual EN v2.1 |
| XY positioning resolution (µm) | 12.5 Sources: Ultimaker 2 user manual EN v2.1 |
| Z Positioning (µm) | 5 Sources: Ultimaker 2 user manual EN v2.1 |
| Maximum Travel Speed | 350 mm/s Sources: Ultimaker 2 user manual EN v2.1 |
| Published Print Speed Range | 30–300 mm/s Sources: Ultimaker 2 user manual EN v2.1 |
| Bed Temperature (°C) | 100 Sources: Ultimaker 2 user manual EN v2.1 |
| Machine weight (kg) | 11.2 Sources: Ultimaker 2 user manual EN v2.1 |
| Maximum Power (W) | 221 Sources: Ultimaker 2 user manual EN v2.1 |
| Connectivity | Standalone SD card printing Sources: Ultimaker 2 user manual EN v2.1 |
| Slicing Software | Cura Sources: Ultimaker 2 user manual EN v2.1 |
| File Formats | STL, OBJ, DAE and AMF Sources: Ultimaker 2 user manual EN v2.1 |
Original Ultimaker 2 hardware
This manual describes the original single-nozzle Ultimaker 2, including its 0.4 mm nozzle and SD-card workflow. It is distinct from 2+ and 2+ Connect.
Temperature and layer presets
The manual gives a 180–260°C nozzle range, 50–100°C bed operation and four layer presets. Its positioning figures describe machine motion, not finished-part tolerances.
Introduced in 2013.
Introduced September 2013 according to UltiMaker's retrospective.
Family: Ultimaker 2 · Historical model
What changed
- Ready-assembled design
- Heated build plate
Read this with the specifications
Historical documentation verifies identity; current sale availability is not established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.