DLPManufacturer image: SprintRaySprintRay Pro 95S
Larger-format Pro S dental printer with a 95 µm minimum-feature specification.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | 2022 |
|---|---|
| Model family | Pro S |
| Process | DLP |
| Build envelope (X × Y × Z) | 182 × 102 × 200 mm |
| Nominal box volume | 3.71 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Photopolymer resin |
| Manufacturer listing status | Manufacturer-listed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Professional · editorial grouping |
Technical specifications
| Wavelength (nm) | 405 |
|---|---|
| Layer Heights (µm) | 50, 100, 170 |
| Minimum Feature Size (µm) | 95 Published minimum feature size, not general dimensional tolerance. |
| Tank Capacity (mL) | 500 |
| Projection Format | 1080p Full HD DLP |
| Separation Mechanism | Direct peel |
| Resin Filling | Manual |
| Display (inches) | 7 |
| Machine dimensions (mm) | 381 × 439 × 531 Closed lid, W × D × H. |
| Lid Open Machine Dimensions (mm) | 381 × 541 × 686 |
| Rated Power (W) | 200 |
| Operating Ambient Temperature (°C) | 21–29 |
| Connectivity | Wi-Fi, Ethernet, USB |
| Manufacturer Speed | Up to 2 inches/hour Datasheet maximum claim; not a guaranteed rate for every resin. |
Exposure system
Pro S uses whole-layer DLP projection and a direct-peel mechanism.
Installation and operation
Allow clearance for the open lid. Material selection and layer settings determine throughput.
Introduced in 2022.
Pro S family announcement dated January 12, 2022.
Family: Pro S · Current / announced
Read this with the specifications
The official Pro S sheet identifies a 95 µm minimum feature size for Pro95 S. This is distinct from finished-part accuracy. Pro95 S specifications are not transferred to the earlier Pro95 model.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
MAX 2 (50)
Manufacturer MAX 2 platform image used for this exact configuration. Internal optical or application differences are not visible in the shared exterior.