FFFSnapmaker — official manufacturer imageSnapmaker J1
Independent dual-extrusion printer with copy and mirror modes.
Source reviews: 2026-10-17.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | J1 |
| Process | FFF Sources: Snapmaker J1 official specifications |
| Build envelope (X × Y × Z) | 300 × 200 × 200 mm Sources: Snapmaker J1 official specifications |
| Nominal box volume | 12.00 L · calculated from the envelope Sources: Snapmaker J1 official specifications |
| Enclosure | Not verified |
| Maximum nozzle temperature | 300 °C Sources: Snapmaker J1 official specifications |
| Materials cited in this profile | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF Sources: Snapmaker J1 official specifications |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Desktop · editorial grouping |
Technical specifications
| Extrusion System | IDEX Sources: Snapmaker J1 official specifications |
|---|---|
| Copy Mode Build Volume (mm) | 160 × 200 × 200 Sources: Snapmaker J1 official specifications |
| Mirror Mode Build Volume (mm) | 150 × 200 × 200 Sources: Snapmaker J1 official specifications |
| Bed Temperature Max (°C) | 100 Sources: Snapmaker J1 official specifications |
Configuration and workflow
Default and backup modes use the full working volume. Copy mode permits 160 × 200 × 200 mm per part; mirror mode permits 150 × 200 × 200 mm. Slicer setup must match the selected IDEX mode.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: J1 · Listing status only
Explore Snapmaker through the generationsRead this with the specifications
Manufacturer documentation establishes this model and the cited configuration. Retail stock and regional availability were not independently established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.