pro-beam
PB WEBAM 100
PB WEBAM 100 is the long machine at lower right; PB EBM 30S is shown at upper left.
Not verifiedIndustrial
Electron beam wire DEDManufacturer image: SciakySciaky EBAM 110
Electron beam wire DEDIndustrialCatalog listing sourced
Vacuum-chamber electron-beam additive system depositing metal wire layer by layer.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The machine at a glance
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Electron beam wire DED |
| Process | Electron beam wire DED |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Metal wire |
| Manufacturer listing status | Official documentation available; current order availability not confirmed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Vacuum Chamber Dimensions (mm) | 2794 × 2794 × 2794 |
|---|---|
| Work Envelope (mm) | 1778 × 1194 × 1600 |
| Nominal Part Envelope (mm) | 2692 × 1194 × 1600 |
| Maximum Beam Power (kW) | 42 Manufacturer maximum, not continuous electrical consumption. |
| Beam Voltage (kV) | 60 |
| Chamber Vacuum | 1 × 10⁻⁴ Torr |
| Linear Motion Axes | X, Y, Z |
| Gun Motion | Servo tilt axis; internal boom-mounted gun |
| Wire Feeding | Motorized nozzle |
| Process Control | IRISS closed-loop imaging and sensing |
Model notes · 01
Three different envelope measurements
For EBAM 110, the chamber is 2794 mm cubed, the work envelope is 1778 × 1194 × 1600 mm, and the nominal part envelope is 2692 × 1194 × 1600 mm. These figures describe different constraints and should not be collapsed into one rectangular printable volume.
Model notes · 02
Near-net wire deposition
An electron beam deposits wire in a vacuum chamber, with IRISS adjusting process parameters from imaging and sensing feedback. Sciaky describes finishing machining after deposition. The family-wide deposition-rate range and dual-wire options are not asserted as standard capabilities of this exact EBAM 110 configuration.
A place in the lineage
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Electron beam wire DED · Listing status only
Explore Sciaky through the generationsRead this with the specifications
The official source distinguishes work envelope, nominal part envelope and vacuum-chamber dimensions. These are retained separately rather than using chamber dimensions as print volume.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
Continue exploring
More Electron beam wire DED printers