FFFPrusa · official manufacturer imagePrusa XL+
Large-format printer with up to five independent toolheads.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | FFF |
| Build envelope (X × Y × Z) | 360 × 360 × 360 mm |
| Nominal box volume | 46.66 L · calculated from the envelope |
| Enclosure | Open frame |
| Maximum nozzle temperature | 290 °C |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Desktop · editorial grouping |
Technical specifications
| Toolhead Configurations | 1, 2 or 5 independent toolheads |
|---|---|
| Machine dimensions (mm) | 700 × 900 × 720 |
| Machine weight (kg) | 30 Approximate manufacturer value; installed tools and accessories change the complete configuration. |
| Heated Bed Segments | 16 |
| Motion System | CoreXY with GT1.5 belts |
| First Layer Calibration | Load-cell nozzle probing |
| Tool Alignment | Automatic electronic alignment sensor |
| Nozzle Cleaning | Automatic nozzle wiper |
| Extrusion System | Direct-drive Nextruder |
| Optional Enclosure Temperature (°C) | 50 |
| Forthcoming Heater Temperature (°C) | 60 |
| Maximum Spool Capacity | Five 2 kg spools in the five-tool configuration |
| Network Requirement | Full offline operation |
What changes in XL+
The XL+ adds electronic tool alignment, revised cooling, GT1.5 belts and nozzle wiping. Separate tools retain their own filament and nozzle, allowing different materials or nozzle sizes in one job.
Enclosure and future tools
The base machine is open-frame. The optional Enclosure XL+ is rated to 50°C; the separate heater for 60°C and silicone toolhead remain announced additions on the reviewed page.
Build-plate specification discrepancy
The XL+ page lists a 120°C bed limit while the L+ comparison table lists 115°C for XL+. That inconsistent limit is not added as a verified numeric specification.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Prusa through the generationsRead this with the specifications
Manufacturer listing; stock and regional availability are not verified.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.