MovingLight DLPManufacturer image: ProdwaysProdways CERAM PRO 365
Configurable DLP printer for ceramic-loaded feedstocks.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | CERAM PRO |
| Process | MovingLight DLP |
| Build envelope (X × Y × Z) | 264 × 328 × 350 mm |
| Nominal box volume | 30.31 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Ceramic-filled photopolymer resin |
| Manufacturer listing status | Manufacturer-listed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Optional Wavelengths (nm) | 385, 405 Available on request; not the standard 365 nm configuration. |
|---|---|
| Layer Height Range (µm) | 50–175 |
| Projection Heads | 1 |
| Wavelength (nm) | 365 Standard wavelength; 385 and 405 nm alternatives are available on request. |
| XY pixel pitch (µm) | 31 Metric native pixel value used because the page’s parenthetical inch conversion is inconsistent. |
| Minimum Platform Dimensions (mm) | 66 × 41 |
| Maximum Platform Dimensions (mm) | 264 × 328 |
| Minimum Starting Material (mL) | 500 Lowest stated initial fill; depends on configured vat and platform. |
| Machine dimensions (mm) | 855 × 1100 × 1780 |
| Machine weight (kg) | 510 |
| Projector Irradiance | 130 mW/cm² at 365 nm |
| Power Supply | 210–240 VAC, 8–12 A, 50/60 Hz |
| Platform Type | Perforated metal |
Top-down ceramic printing
CERAM PRO 365 uses a moving UV-LED DLP head above the material vat. Modular platforms let users match the area and starting slurry quantity to a job.
Feedstocks and later processing
The manufacturer documents Tethon 3D silica and alumina formulations for casting-related applications, technical ceramics and research. Printed ceramic-loaded parts require the material-specific downstream process.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: CERAM PRO · Current / announced
Explore Prodways through the generationsRead this with the specifications
The build volume is the maximum configured envelope, not a promise that every modular optical configuration has that area. Ceramic parts require the prescribed post-print thermal processing.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.