DLPManufacturer image: MiiCraftMiiCraft Prime 4K
DLP resin printer with a 150 × 84.5 mm build area.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Prime |
| Process | DLP |
| Build envelope (X × Y × Z) | 150 × 84.5 × 120 mm |
| Nominal box volume | 1.52 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Photopolymer resin |
| Manufacturer listing status | Manufacturer-listed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Professional · editorial grouping |
Technical specifications
| Layer Height Range (µm) | 5–500 Published selectable Z-layer range, not accuracy or minimum printable feature size. |
|---|---|
| Available Wavelengths (nm) | 385, 405 LED wavelength choices; ordered optical configuration should be confirmed. |
| Projection Resolution | 3840 × 2160 |
| XY pixel pitch (µm) | 39 |
| Display (inches) | 7 |
| Connectivity | Ethernet, USB |
| Release System | Active tank-tilt peeling |
| Material Heating | Temperature-controlled heater |
| Identification | RFID resin, platform and tank tracking |
| Material Architecture | Open material system |
Tilt-assisted separation
Prime 4K tilts its resin tank to reduce separation forces. The manufacturer positions this mechanism for large exposed areas and more viscous formulations.
Production records
RFID records material lots and tank/platform use. Open material and software support allows third-party workflows; the manufacturer does not supply one universal material-temperature limit on this page.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Prime · Current / announced
Explore MiiCraft through the generationsRead this with the specifications
Wavelength and layer settings are supported configurations, not a claim that every material uses the entire stated range.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
MAX 2 (50)
Manufacturer MAX 2 platform image used for this exact configuration. Internal optical or application differences are not visible in the shared exterior.