FFFMarkforged · official manufacturer imageMarkforged Mark Two (Gen 2)
Filament printer with continuous-fiber reinforcement.
Source reviews: 2026-10-17.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Mark Two |
| Process | FFF |
| Build envelope (X × Y × Z) | 320 × 132 × 154 mm |
| Nominal box volume | 6.50 L · calculated from the envelope |
| Enclosure | Not verified |
| Maximum nozzle temperature | Not verified |
| Materials cited in this profile | Not verified |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Professional · editorial grouping |
Technical specifications
| Reinforcement Process | Continuous fiber reinforcement |
|---|
Configuration and workflow
The Gen 2 datasheet lists Onyx and Nylon White with carbon, glass, aramid and HSHT glass reinforcement. Reinforcement selection is separate from the plastic feedstock.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Mark Two · Listing status only
Explore Markforged through the generationsRead this with the specifications
The cited manufacturer documentation identifies this configuration; regional supply and stock were not established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.