FFFManufacturer image: LulzBotLulzBot TAZ Pro
Open-hardware filament printer with two active-lifting hot ends for multi-material printing.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | TAZ Pro |
| Process | FFF |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Maximum nozzle temperature | 290 °C |
| Materials cited in this profile | Thermoplastic filament, Composite filament |
| Manufacturer listing status | Historical / legacy documentation |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Extrusion System | Two actively lifting hotends |
|---|---|
| Filament diameter (mm) | 2.85 |
| Optional Filament Diameter (mm) | 1.75 |
| Included Nozzle Diameter (mm) | 0.5 |
| Nozzle Material | Hardened steel |
| Layer height (µm) | 100–400 100–400 µm with the supplied Pro Dual Extruder. |
| Bed Temperature (°C) | 110 |
| Maximum Travel Speed | 300 mm/s Firmware travel limit, not a rated printing speed. |
| XY positioning resolution (µm) | 10 Positioning resolution, not finished-part accuracy. |
| Z Positioning (µm) | 2 |
| Power Supply (W) | 500 |
| Display | 5-inch resistive touchscreen |
| Connectivity | USB serial and standalone USB flash drive |
| Slicing Software | Cura LulzBot Edition |
| Enclosure Configuration | Optional enclosure |
Legacy dual-extrusion platform
LulzBot now labels this model as a legacy printer. The standard Pro Dual Extruder uses 2.85 mm filament; 1.75 mm printing requires a different tool configuration.
Calibration and published limits
Automatic nozzle wiping, offset calibration, bed leveling and two filament sensors support setup. The listed layer range applies to the supplied tool, while the broader platform range depends on optional tool heads.
Build-envelope discrepancy
The overview gives 280 × 280 × 285 mm, while the technical table gives 285 × 285 × 285 mm. Confirm usable travel for the installed tool before planning a close-fitting part.
Explore the model family.
Introduction year has not been established from the cited evidence.
Family: TAZ Pro · Historical model
Explore LulzBot through the generationsRead this with the specifications
Manufacturer labels this a legacy printer. Build dimensions are omitted because the same page gives both 280 × 280 × 285 and 285 × 285 × 285 mm.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.