3Dprintsy.
Home / Printers / Fabbrix / ELEMENTO TC
Fabbrix ELEMENTO TC — official product imageFFFManufacturer image: Fabbrix
Fabbrix

Fabbrix ELEMENTO TC

FFFIndustrialDimensions sourced

Large-format filament extrusion printer with a toolchanger, encoder-assisted motion and a three-motor Z axis.

Official product

Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.

The machine at a glance

The details that matter.

Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.

Core specifications for Fabbrix ELEMENTO TC
Introduction yearNot verified
Model familyELEMENTO TC
ProcessFFF
Build envelope (X × Y × Z)1100 × 600 × 620 mm
Nominal box volume409.20 L · calculated from the envelope
EnclosureNot verified
Maximum nozzle temperature350 °C
Sources: Fabbrix ELEMENTO TC — official product information
Materials cited in this profilePLA, PETG, ABS, ASA, PA, PC, PPS, TPU
Manufacturer listing statusOfficial documentation available
Regional stock and priceCheck the manufacturer
Market groupingIndustrial · editorial grouping

Technical specifications

Additional technical specifications for ELEMENTO TC
Extruder Count2
Sources: Fabbrix ELEMENTO TC — official product information
Nozzle Diameter Options (mm)0.6, 0.8, 1, 1.2
Sources: Fabbrix ELEMENTO TC — official product information
Filament Diameter Options (mm)1.75, 2.85

The page lists 2.85/1.75 mm; confirm the installed feed and tool configuration rather than assuming one tool accepts both.

Sources: Fabbrix ELEMENTO TC — official product information
Layer height (µm)150–900
Sources: Fabbrix ELEMENTO TC — official product information
Bed Temperature (°C)120
Sources: Fabbrix ELEMENTO TC — official product information
Machine dimensions (mm)1630 × 1170 × 1880
Sources: Fabbrix ELEMENTO TC — official product information
Machine weight (kg)580
Sources: Fabbrix ELEMENTO TC — official product information
Maximum Build Speed300 mm/s
Sources: Fabbrix ELEMENTO TC — official product information
Bed LevelingThree independent Z motors with mesh scanning
Sources: Fabbrix ELEMENTO TC — official product information
Build SurfaceFlexible PEI-coated plate
Sources: Fabbrix ELEMENTO TC — official product information
ConnectivityWi-Fi, LAN and USB
Sources: Fabbrix ELEMENTO TC — official product information
Slicing SoftwareUltiMaker Cura
Sources: Fabbrix ELEMENTO TC — official product information
Display11.6-inch touchscreen
Sources: Fabbrix ELEMENTO TC — official product information
Air FiltrationHEPA and activated carbon
Sources: Fabbrix ELEMENTO TC — official product information
Model notes · 01

Two-tool configuration

ELEMENTO TC uses a tool changer with two printing nozzles. It is separate from the five-tool ELEMENTO TC5 listed elsewhere in the manufacturer range.

Sources: Fabbrix ELEMENTO TC — official product information
Model notes · 02

Bed and materials

Three independent Z motors correct bed tilt, followed by surface probing for mesh compensation. The manufacturer supports its own and third-party industrial filaments.

Sources: Fabbrix ELEMENTO TC — official product information
A place in the lineage

Explore the model family.

Introduction year has not been established from the cited evidence.

Family: ELEMENTO TC · Listing status only

Explore Fabbrix through the generations

Read this with the specifications

Representative model documented by the manufacturer. This entry does not establish a complete product range, first-shipment date, current inventory or regional availability.

A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.

Continue exploring
More FFF printers