Hot LithographyManufacturer image: CubicureCubicure Caligma
Heated stereolithography system for high-viscosity photopolymer resins.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Caligma |
| Process | Hot Lithography |
| Build envelope (X × Y × Z) | 200 × 100 × 285 mm |
| Nominal box volume | 5.70 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Photopolymer resin |
| Manufacturer listing status | Manufacturer-listed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Laser Wavelength (nm) | 405 Sources: Caligma specifications |
|---|---|
| Laser Spot FWHM (µm) | 18 Existing 18 µm value is full width at half maximum of the laser spot. Sources: Caligma specifications |
| Process Temperature Max (°C) | 100 Existing 100 °C is maximum process temperature; do not label as a hotend setting. Sources: Caligma specifications |
| Exposure System | 405 nm laser-scanning system |
| Material Class | High-viscosity photopolymer resins |
| Production Role | Prototypes and small production batches |
| Process Family | Hot Lithography |
| Scale Up System | Cubicure Cerion |
Heated photopolymer processing
Caligma uses Hot Lithography to process viscous resins for polymer prototypes and smaller production runs. Its heated process is designed around material behavior rather than filament extrusion.
From development to production
Cubicure positions Caligma alongside Cerion so prototype development can transfer into larger-scale production. The laser spot specification is an optical measurement, not a blanket dimensional tolerance.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Caligma · Current / announced
Explore Cubicure through the generationsRead this with the specifications
The temperature is a lithography process condition, not an extrusion hotend limit. Laser spot width is not dimensional accuracy.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.