FFFManufacturer image: CreatBotCreatBot D1000 Pro HS
Large-format enclosed extrusion system with automatic dual-nozzle calibration and filament drying.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | D1000 Pro HS |
| Process | FFF |
| Build envelope (X × Y × Z) | 1050 × 1050 × 1050 mm |
| Nominal box volume | 1157.63 L · calculated from the envelope |
| Enclosure | Enclosed |
| Maximum nozzle temperature | 420 °C |
| Materials cited in this profile | PLA, ABS, ASA, PA-CF, PET-CF |
| Manufacturer listing status | Official documentation available |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Dual Extrusion Build (mm) | 990 × 1000 × 1000 |
|---|---|
| Chamber Temperature (°C) | 80 |
| Single Extrusion Build (mm) | 1050 × 1050 × 1050 |
| Bed Temperature (°C) | 100 |
| Material Dryer Temperature (°C) | 70 Published adjustable dryer range is 0–70°C. |
| Filament diameter (mm) | 1.75 |
| Included Nozzle Diameter (mm) | 0.8 |
| Nozzle Diameter Options (mm) | 0.3, 0.4, 0.6, 0.8, 1 |
| Maximum Volumetric Flow | 90 mm³/s Advertised upper limit; achievable flow depends on material, nozzle and temperature. |
| Machine dimensions (mm) | 1870 × 1430 × 1940 |
| Machine weight (kg) | 750 |
| Connectivity | USB, Wi-Fi and LAN |
| Display | 10-inch touchscreen |
| Air Filtration | HEPA and activated carbon |
Two lifting nozzles
The inactive nozzle lifts and closes behind a shutter. Dual-material operation has a smaller usable envelope than single-nozzle operation.
Calibration and local operation
Eddy-current bed leveling, four independent Z drives and camera-assisted XY offset calibration are provided. The LAN workflow supports control, file transfer and firmware updates without an internet connection.
Published speed discrepancy
The page headline advertises 600 mm/s, while its specification table lists 300 mm/s. Neither value is used here as an unqualified verified print-speed limit.
Explore the model family.
Introduction year has not been established from the cited evidence.
Family: D1000 Pro HS · Listing status only
Explore CreatBot through the generationsRead this with the specifications
Displayed build envelope is single extrusion; dual extrusion is 990 × 1000 × 1000 mm. Official page has conflicting speed claims, so no speed is recorded.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.