FFFManufacturer image: CraftbotCraftbot FLOW IDEX
Independent dual-extrusion printer for multi-material, mirrored and duplicated print jobs.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | FLOW IDEX |
| Process | FFF |
| Build envelope (X × Y × Z) | 386 × 250 × 250 mm |
| Nominal box volume | 24.13 L · calculated from the envelope |
| Enclosure | Not verified |
| Maximum nozzle temperature | 300 °C |
| Materials cited in this profile | Thermoplastic filament |
| Manufacturer listing status | Official documentation available |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Dual Extrusion Build (mm) | 351 × 250 × 250 |
|---|---|
| Extruder Count | 2 |
| Single Head Build (mm) | 386 × 250 × 250 |
| Dual Head Build (mm) | 351 × 250 × 250 |
| Mirror Mode Per Part Build (mm) | 198 × 250 × 250 Each mirrored part is limited to 198 mm width. |
| Parallel Mode Per Part Build (mm) | 212.5 × 250 × 250 Each duplicated part is limited to 212.5 mm width; these are not full-width dual-material envelopes. |
| Internal Storage | 4 GB |
| Display | 5-inch color touchscreen |
| Controller | 32-bit PR3DATOR board; Raspberry Pi HMI |
| Bed Leveling | Mesh leveling with guided setup |
| Filament Monitoring | Filament monitoring sensor |
| Frame Construction | Reinforced steel |
Use the envelope for your mode
The advertised total area is 425 × 250 × 250 mm. Single-head and dual-material printing have smaller usable widths; duplication and mirror modes divide the width between two parts.
Control and material handling
The independent heads allow different materials, including soluble support. A web interface, touchscreen, dual-drive feed and filament monitoring support operation.
Explore the model family.
Introduction year has not been established from the cited evidence.
Family: FLOW IDEX · Listing status only
Explore Craftbot through the generationsRead this with the specifications
Build field uses the stated single-head print envelope. The larger 425 × 250 × 250 mm headline is total area, not the single or dual head envelope.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
INDUSTRY F340
Manufacturer-issued brochure preserved by distributor Multi3DPrint; original manufacturer links are no longer available.