Ackuretta
SOL
Original embedded manufacturer PDF image extracted without re-encoding. Original background and any inherent PDF-image raster edges retained.
129 × 80 × 120 mmProfessional
MSLAManufacturer image: AnycubicAnycubic Photon P1 Max
MSLADesktopDimensions sourced
Monochrome-LCD resin printer in the Photon range.
Source reviews: 2026-10-15, 2026-10-16.
Specifications are reported claims, not independent test results.
The machine at a glance
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | MSLA |
| Build envelope (X × Y × Z) | 285.5 × 214 × 300 mm |
| Nominal box volume | 18.33 L · calculated from the envelope |
| Enclosure | Not verified |
| Materials cited in this profile | Photopolymer resin |
| Manufacturer listing status | Listed by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Desktop · editorial grouping |
Technical specifications
| XY pixel pitch (µm) | 24.8 × 24.8 Square pixel pitch, not a universal accuracy tolerance. |
|---|---|
| LCD resolution (pixels) | 11520 × 8640 |
| Layer height (µm) | 20–150 |
| Release Film | NFEP |
| Vat Capacity (mL) | 1900 |
| Power Rating (W) | 296 |
| Display | 4.5-inch resistive touchscreen |
| Z Axis | Dual linear rails and ball screws |
| Resin Auto Fill | Not supported |
| Power Loss Recovery | Supported |
| Reported Print Speed | 15–25 mm/h at 0.05 mm layers with standard resin Manufacturer result for the stated resin and layer height. |
Model notes · 01
Large-format resin handling
P1 Max uses a temperature-controlled 1.9 L vat and a precision-ground steel platform. The product table explicitly excludes an automatic resin-fill unit. Its feedback and self-check functions support leveling, but do not remove the need to follow setup instructions.
Model notes · 02
Material-dependent heating
Automatic material recognition and preset temperatures are described for Anycubic resins. The manufacturer qualifies heating performance by ambient conditions and vat capacity, so presets should not be assumed to transfer to any third-party resin.
A place in the lineage
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Explore Anycubic through the generationsRead this with the specifications
LCD technology verified on product page; build envelope checked in the official resin comparison catalog. Accessory bundles are not separate machines.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
Continue exploring
More MSLA printers 
