FFFManufacturer image: AnycubicAnycubic Kobra Go
Kobra filament printer with a 220 × 220 × 250 mm volume, a 2.4-inch screen and speeds up to 100 mm/s.
Source reviews: 2026-11-01.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Kobra |
| Process | FFF |
| Build envelope (X × Y × Z) | 220 × 220 × 250 mm Sources: Anycubic Kobra Go product page |
| Nominal box volume | 12.10 L · calculated from the envelope Sources: Anycubic Kobra Go product page |
| Enclosure | Open frame Read from the manufacturer’s product image; the cited source does not state it in words. Sources: Anycubic Kobra Go product image |
| Maximum nozzle temperature | 260 °C Sources: Anycubic Kobra Go product page |
| Materials cited in this profile | PLA, ABS, PETG, TPU Sources: Anycubic Kobra Go product page |
| Manufacturer listing status | Documented by manufacturer |
| Regional stock and price | Check the manufacturer |
| Market grouping | Desktop · editorial grouping |
Technical specifications
| Bed Temperature Max (°C) | 110 Sources: Anycubic Kobra Go product page |
|---|---|
| Display | 2.4-inch LCD screen with control knob Sources: Anycubic Kobra Go product page |
Specification summary
Anycubic's Kobra Go page lists a 220 x 220 x 250 mm build volume, a 260 °C nozzle limit, a 110 °C hot bed limit and speeds below 100 mm/s. It specifies a 2.4-inch screen with a control knob, a single threaded Z axis and LeviQ 25-point automatic leveling.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Kobra · Listing status only
Explore Anycubic through the generationsRead this with the specifications
Manufacturer documentation establishes this model and the cited configuration. Retail stock and regional availability were not independently established.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
SV07
Official comparison plate: SV07 is on the left; SV07 Plus is on the right.
