Wire laser DEDManufacturer image: ADDiTECADDiTEC Performance AMRC-P
Portable robotic laser deposition cell designed for wire-fed metal printing.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | 2023 |
|---|---|
| Model family | Wire laser DED |
| Process | Wire laser DED |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Titanium alloys, Aluminum alloys, Copper alloys, Steel, Nickel alloys |
| Manufacturer listing status | Official documentation available; current order availability not confirmed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Laser Power (W) | 6000 Maximum laser output stated in the June 2023 specification; not total electrical consumption. |
|---|---|
| Laser Wavelength (nm) | 1032 |
| Layer height (µm) | 800–1200 |
| Wire Diameter Range (mm) | 0.8, 1.2 |
| Maximum Deposition Rate | 4 kg/h for titanium Manufacturer maximum for titanium; not a generic production rate. |
| Motion Axes | 6 + 2 |
| Robot Options | ABB, FANUC, YASKAWA |
| Cooling | Active water cooling |
| Shielding Gas | Argon, Nitrogen |
| Chamber Oxygen | Below 10,000 ppm; local melt-pool shielding lowers oxygen further |
| Approximate Weight (lb) | 10000 |
| Deposition Control | Pyrometer feedback adjusts laser power and wire feed |
Portable wire DED cell
The AMRC-P combines a fiber-laser deposition head with a multi-axis robot and an inerted portable cell. ADDiTEC lists iron, nickel, titanium, copper and aluminum alloy feedstocks; the quoted 4 kg/h maximum specifically describes titanium.
Motion and atmosphere
The datasheet specifies a 5.9 ft cube as the nominal build volume and an approximately 7.5 × 9 × 10.6 ft cell. A vacuum-assisted inert environment and local shielding serve different roles; the chamber oxygen specification should not be read as the oxygen level at every point in the melt pool.
Introduced in 2023.
Manufacturer launch announcement dated May 16, 2023.
Family: Wire laser DED · Listing status only
Explore ADDiTEC through the generationsRead this with the specifications
Launch-year capabilities are documented in the announcement and manufacturer sheet. Configuration and present ordering status need confirmation.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
AZ600-F20
AZ600 family image supplied for the AZ600-F20 and AZ600-F40 launch; laser configuration is not visually distinguished.