Materials / Research brief

Mexican researchers set a 10 MPa fatigue design limit for printed carbon-fibre PLA

Rotating-bending tests at eleven stress levels showed three distinct fatigue regimes and cracks running between rasters in short-fibre CF-PLA.

Contextual render of a carbon-fibre-filled filament spool from an earlier materials story; not the CF-PLA tested in this study.
Contextual render of a carbon-fibre-filled filament spool from an earlier materials story; not the CF-PLA tested in this study. Image: Xenia Materials

What happened

Researchers from Mexico’s Instituto Politécnico Nacional, Tecnológico de Monterrey in Puebla and the automotive supplier Kautex Textron de México published a fatigue study of fused-filament-printed, short carbon-fibre-reinforced PLA in The International Journal of Advanced Manufacturing Technology on November 6. They ran rotating-bending fatigue tests at eleven stress levels and tracked how stiffness fell as damage accumulated.

A piecewise semi-logarithmic fit captured three distinct slopes in the stress-life data better than a single Stromeyer curve. For damage modelling, a two-parameter Chaboche model reproduced the non-linear stiffness loss about as well as the more heavily parameterised Mao-Mahadevan model. Fracture surfaces showed internal shear yielding leading to stress whitening, micro-crazing and cracks running both across and between printed rasters. Using a lower confidence bound on the data, the authors propose a statistically safe design stress of 10.07 MPa.

The article is paywalled and this brief rests on its abstract and record page, which do not give the filament brand, fibre content, print settings, raster orientation, specimen count or the cycle count behind the design limit. The figure applies to rotating bending of the authors’ specimens and should not be read as a general rating for CF-PLA. The authors report no outside funding.

Advertisement

Read the sources

Primary-source reporting; this is not a hands-on review. Sources checked Nov 7, 2026.

← All news