Materials / Material launch

Bambu Lab launches PLA Palette, a five-spool CMYKW set made for layered color mixing

Four opaque bases and a deliberately translucent black are tuned to stack into more than 180 colors, with a blending database built into Bambu Studio.

Bambu Lab’s launch graphic for PLA Palette CMYKW: white, yellow, cyan and black spools stacked beside a leaning magenta spool and a multicolor printed hummingbird, under the line “Five colors go in. Any color comes out.”
Bambu Lab’s launch graphic for PLA Palette CMYKW: white, yellow, cyan and black spools stacked beside a leaning magenta spool and a multicolor printed hummingbird, under the line “Five colors go in. Any color comes out.” Image: Bambu Lab

What happened

Bambu Lab announced PLA Palette CMYKW in the Announcements section of its official forum on November 5, describing it as “more than five regular spools put in one box”: a set formulated specifically for color mixing. The kit pairs four opaque bases, cyan, magenta, yellow and white, with one translucent black, and the company says layering them unlocks more than 180 color combinations. The post says the set is available now from the Bambu Lab Store and is compatible with all Bambu Lab printers.

According to Bambu Lab, the opaque colors are built on its PLA Basic formulation with precisely dosed pigment and let through under 1% of light at a 2 mm wall, so they give full coverage, while the black is meant to behave like an ink wash: its light transmission falls off predictably with thickness, so shadows deepen as layers build up. Using the PLA Basic base resin rather than a conventional translucent formulation is said to significantly reduce stringing and oozing through dense color changes. Bambu Studio ships with a full blending database for the set, and the Bambu Studio 2.9.1 release notes add a “Use Official Color Mixing Kit” button that adds the kit’s filaments to a project automatically.

The announcement gives no price, spool weight or technical data sheet, and Bambu Lab’s store page refused automated access, so those details could not be checked for this report. The post also does not say how many multi-material slots or which AMS setup a five-color mix needs, or how much extra purge waste and print time the additional color swaps add. The 180-plus figure, the clean color boundaries and the promise that the slicer preview matches the finished print are Bambu Lab’s own claims and have not been independently tested.

Advertisement

Read the sources

Primary-source reporting; this is not a hands-on review. Sources checked Nov 9, 2026.

← All news