How the two machines differ on paper: build volume, process, enclosure, nozzle temperature, launch year and the materials each manufacturer names. This is a specification comparison, not a hands-on test.
FFFKlaus-Dieter Keller / CC0 1.0 / Wikimedia Commons
FFFManufacturer image: Bambu LabGenerated from the two sourced profiles on 2026-11-02. Fields a source doesn't establish are left out of the comparison rather than guessed.
Published specifications don't settle print quality, reliability or noise. Compare the exact configuration, bundled accessories, regional price and support with each manufacturer, and check that the materials you need are supported on the configuration you'd buy.
| Specification | Original Prusa MINI+ | Bambu Lab A1 mini |
|---|---|---|
| Manufacturer | Prusa | Bambu Lab |
| Printing process | FFF | FFF |
| Build envelope (X × Y × Z) | 180 × 180 × 180 mm | 180 × 180 × 180 mm |
| Nominal box volume | 5.83 L | 5.83 L |
| Enclosure | Open frame | Open frame |
| Maximum nozzle temperature | 280 °C | 300 °C |
| Introduction year | 2020 | 2023 |
| Collection | Current / announced | Listing status only |
| Market grouping (editorial) | Desktop | Desktop |
| Materials named by the manufacturer | PLA, PETG | PLA, PETG, TPU, PVA |
| Layer height (µm) | 50–250 | Not verified |
| Included Nozzle Diameter (mm) | 0.4 | Not verified |
| Filament diameter (mm) | 1.75 | Not verified |
| Bed Temperature (°C) | 100 | Not verified |
| Extrusion System | Bowden with 3:1 gearing | Not verified |
| Bed Probe | SuperPINDA | Not verified |
| Controller | 32-bit Buddy with TMC2209 drivers | Not verified |
| Display | 2.8-inch color LCD | Not verified |
| Machine dimensions (mm) | 380 × 330 × 380 | 347 × 315 × 365 |
| Machine weight (kg) | 4.5 | 5.5 |
| Connectivity | USB and Ethernet; optional Wi-Fi module | Not verified |
| Filament Sensor | Optional upgrade | Not verified |
| Motion Compensation | Input Shaper and Pressure Advance | Not verified |
| Bed Max (°C) | Not verified | 80 |
| Nozzle Diameter (mm) | Not verified | 0.4 |
| Optional Nozzle Diameters (mm) | Not verified | 0.2, 0.6, 0.8 |
| Toolhead Speed Max (mm/s) | Not verified | 500 |
| Toolhead Acceleration Max (mm/s²) | Not verified | 10000 |
| Monitoring Camera | Not verified | Low frame rate; up to 1080p |
| Filament Sensors | Not verified | Runout, Odometry, Tangle |
| Power Loss Recovery | Not verified | Supported |
Compact MINI revision with the SuperPINDA bed-leveling sensor.
The MINI+ combines a remote filament drive with an automatic bed-probing routine and removable magnetic steel sheets. It still uses manual first-layer Z adjustment.
Full sourced profileCompact filament printer with a 180 mm cubic build volume.
The specification table identifies PLA, PETG, TPU and PVA as ideal materials. ABS, ASA, PC, PA, PET and fiber-reinforced polymers are explicitly not recommended; the nozzle temperature alone does not establish material suitability.
Full sourced profile