3Dprintsy.
Printer comparison · specs from manufacturer sources

Creality Ender-3 V3 SE vs Bambu Lab A1 mini

How the two machines differ on paper: build volume, process, enclosure, nozzle temperature, launch year and the materials each manufacturer names. This is a specification comparison, not a hands-on test.

Creality Ender-3 V3 SE — official product imageFFFManufacturer image: Creality
Creality Ender-3 V3 SE
Bambu Lab A1 mini — official product imageFFFManufacturer image: Bambu Lab
Bambu Lab A1 mini

Key differences

  • Creality Ender-3 V3 SE has the larger nominal build envelope: 220 × 220 × 250 mm, about 107% more box volume than Bambu Lab A1 mini (180 × 180 × 180 mm).
  • Both are open-frame designs.
  • Bambu Lab A1 mini reaches the hotter nozzle: 300 °C against 260 °C.
  • Both were introduced in 2023.
  • Material lists differ: Bambu Lab A1 mini documentation also names TPU / flexible filament, PVA / BVOH supports. A material missing from a list means it isn't documented there, not that it can't print.
  • Detailed specifications that differ: machine dimensions (420 × 366 × 490 mm vs 347 × 315 × 365 mm).
  • Only the Creality Ender-3 V3 SE profile documents motion system (Cartesian), print speed max (250 mm/s), acceleration max (2500 mm/s²), connectivity (SD card), firmware (Marlin) and 1 more fields.
  • Only the Bambu Lab A1 mini profile documents bed max (80 °C), nozzle diameter (0.4 mm), optional nozzle diameters (0.2, 0.6, 0.8 mm), toolhead speed max (500 mm/s), toolhead acceleration max (10000 mm/s²) and 4 more fields.

Generated from the two sourced profiles on 2026-11-02. Fields a source doesn't establish are left out of the comparison rather than guessed.

Before you choose

Published specifications don't settle print quality, reliability or noise. Compare the exact configuration, bundled accessories, regional price and support with each manufacturer, and check that the materials you need are supported on the configuration you'd buy.

Open in the interactive comparison

Specifications side by side

Creality Ender-3 V3 SE vs Bambu Lab A1 mini: manufacturer-sourced specifications; matching rows are dimmed.
SpecificationCreality Ender-3 V3 SEBambu Lab A1 mini
ManufacturerCrealityBambu Lab
Printing processFFFFFF
Build envelope (X × Y × Z)220 × 220 × 250 mm180 × 180 × 180 mm
Nominal box volume12.10 L5.83 L
EnclosureOpen frameOpen frame
Maximum nozzle temperature260 °C300 °C
Introduction year20232023
CollectionListing status onlyListing status only
Market grouping (editorial)DesktopDesktop
Materials named by the manufacturerPLA, PETGPLA, PETG, TPU, PVA
Machine dimensions (mm)420 × 366 × 490347 × 315 × 365
Motion SystemCartesianNot verified
Print Speed Max (mm/s)250Not verified
Acceleration Max (mm/s²)2500Not verified
ConnectivitySD cardNot verified
FirmwareMarlinNot verified
Bed LevelingAutomatic leveling and Z offsetNot verified
Bed Max (°C)Not verified80
Nozzle Diameter (mm)Not verified0.4
Optional Nozzle Diameters (mm)Not verified0.2, 0.6, 0.8
Toolhead Speed Max (mm/s)Not verified500
Toolhead Acceleration Max (mm/s²)Not verified10000
Machine weight (kg)Not verified5.5
Monitoring CameraNot verifiedLow frame rate; up to 1080p
Filament SensorsNot verifiedRunout, Odometry, Tangle
Power Loss RecoveryNot verifiedSupported
Creality

Creality Ender-3 V3 SE

Cartesian filament printer with automatic Z-offset and leveling.

This model uses Cartesian motion and a Sprite direct-drive extruder. Automatic leveling and Z-offset setup are distinct from optional motion-calibration accessories.

Full sourced profile
Bambu Lab

Bambu Lab A1 mini

Compact filament printer with a 180 mm cubic build volume.

The specification table identifies PLA, PETG, TPU and PVA as ideal materials. ABS, ASA, PC, PA, PET and fiber-reinforced polymers are explicitly not recommended; the nozzle temperature alone does not establish material suitability.

Full sourced profile

Sources

Creality Ender-3 V3 SE

Bambu Lab A1 mini

Related comparisons

Keep exploring