How the two machines differ on paper: build volume, process, enclosure, nozzle temperature, launch year and the materials each manufacturer names. This is a specification comparison, not a hands-on test.
FFFManufacturer image: Creality
FFFManufacturer image: CrealityGenerated from the two sourced profiles on 2026-11-02. Fields a source doesn't establish are left out of the comparison rather than guessed.
Published specifications don't settle print quality, reliability or noise. Compare the exact configuration, bundled accessories, regional price and support with each manufacturer, and check that the materials you need are supported on the configuration you'd buy.
| Specification | Creality K2 Plus | Creality K1 Max |
|---|---|---|
| Manufacturer | Creality | Creality |
| Printing process | FFF | FFF |
| Build envelope (X × Y × Z) | 350 × 350 × 350 mm | 300 × 300 × 300 mm |
| Nominal box volume | 42.88 L | 27.00 L |
| Enclosure | Enclosed | Enclosed |
| Maximum nozzle temperature | 350 °C | 300 °C |
| Introduction year | 2024 | 2023 |
| Collection | Listing status only | Listing status only |
| Market grouping (editorial) | Desktop | Desktop |
| Materials named by the manufacturer | PLA, PETG, PET, ABS, ASA, PLA-CF, PA-CF, PPA-CF | PLA, PETG, ABS, TPU, PA |
| Machine dimensions (mm) | 495 × 515 × 640 | 435 × 462 × 526 |
| Machine weight (kg) | 35 | Not verified |
| Print Speed Max (mm/s) | 600 | 600 |
| Acceleration Max (mm/s²) | 30000 | 20000 |
| Bed Max (°C) | 120 | 100 |
| Display | 4.3-inch touchscreen | 4.3-inch color touchscreen |
| Monitoring Camera | 1080p at 30 fps | Included |
| Storage | 32 GB eMMC | Not verified |
| Belt Tensioning | Automatic | Not verified |
| Flow Calibration | Nozzle camera | Not verified |
| Connectivity | 2.4/5 GHz Wi-Fi, Ethernet, USB drive, Creality 485 port | Not verified |
| Chamber Max (°C) | 60 | Not verified |
| Nozzle Material | Not verified | Hardened steel |
| Extruder | Not verified | Dual-gear direct drive |
| Build Surface | Not verified | Flexible PEI plate |
K2-series printer with a 350 mm cubic build volume and heated chamber.
The family table specifies active chamber heating and nozzle-camera flow calibration. K2 Plus adds servo control on Z and automatic belt tensioning; K2 Pro uses manual belt adjustment.
Full sourced profileEnclosed CoreXY printer with a 300 mm cubic volume, 300 °C hotend, AI camera and LiDAR leveling.
The manufacturer comparison separates nozzle construction, extrusion hardware and included cameras across K1, K1 Max and K1C. A shared speed headline does not make their hardware identical.
Full sourced profile