Paste extrusionWASP · official manufacturer imageWASP 40100 LDM
Ceramic paste printer using WASP’s liquid deposition modeling process.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Not verified |
| Process | Paste extrusion |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Clay, Porcelain, Stoneware |
| Manufacturer listing status | Manufacturer documentation verified; availability not established |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Build Diameter (mm) | 400 |
|---|---|
| Build Height (mm) | 1000 |
| Build Envelope | Cylinder: diameter 400 mm × height 1,000 mm Cylindrical envelope, not a 400 × 400 mm rectangular cross-section. |
| Intermediate Plate Envelope | Cylinder: diameter 400 mm × height 450 mm |
| Machine dimensions (mm) | 850 × 770 × 1950 Tank support increases total height to 2,700 mm. |
| Machine weight (kg) | 84 |
| Layer height (µm) | 500–5000 |
| Maximum Print Speed | 150 mm/s |
| Included Nozzle Diameters (mm) | 1.5, 2, 3 |
| Material Reservoir (mL) | 5000 |
| Display | 7-inch TFT touchscreen |
| Maximum Power (W) | 200 |
| Compressed Air | 8 bar; at least 50 L tank |
| Connectivity | LAN, Wi-Fi and USB |
| Slicing Software | Simplify3D license included; Cura and Slic3r supported |
Clay extrusion and working shape
The standard LDM 3.0 screw extruder supports retraction. Its printable region is cylindrical, and installing the intermediate plate reduces available height.
Standard equipment and upgrades
A 5 L reservoir and three nozzle sizes are supplied. Continuous material feed, automated plate exchange and the larger XL extruder are separate configurations. The required compressor is not included.
Explore the model family.
Introduction year has not been established from the reviewed source.
Explore WASP through the generationsRead this with the specifications
Cylindrical envelope: diameter 400 mm, height 1000 mm. A diameter is not a fully printable square.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.
