Cold sprayManufacturer image: SPEE3DSPEE3D WarpSPEE3D
Robotic metal additive system that bonds powder through kinetic energy rather than laser melting.
Source reviews: 2026-10-16.
Specifications are reported claims, not independent test results.
The details that matter.
Published specifications for this model. Follow a field's source for its configuration and measurement conditions; older fields refer to the profile's reference list.
| Introduction year | Not verified |
|---|---|
| Model family | Cold spray |
| Process | Cold spray |
| Build envelope (X × Y × Z) | Not verified |
| Nominal box volume | Not verified |
| Enclosure | Not verified |
| Materials cited in this profile | Aluminum, Copper |
| Manufacturer listing status | Official documentation available; current order availability not confirmed |
| Regional stock and price | Check the manufacturer |
| Market grouping | Industrial · editorial grouping |
Technical specifications
| Maximum Part Diameter (mm) | 1000 Manufacturer maximum cylindrical part envelope: Ø1000 × 700 mm. |
|---|---|
| Maximum Part Height (mm) | 700 |
| Maximum Part Weight (kg) | 40 |
| Deposition Spot Diameter (mm) | 6 |
| Maximum Deposition Rate | 100 g/min Manufacturer upper bound; material/geometry-dependent. |
| Machine dimensions (mm) | 3900 × 2100 × 2700 |
| Machine weight (kg) | 3800 Approximate machine mass. |
| Power Supply | 400 V, three phase, 50/60 Hz, 18 kVA |
| Compressed Air | Minimum 35 bar, 1.0 m³/min |
| Reported Noise | Below 85 dBA at 1 m |
| Software | TwinSPEE3D |
| Input Formats | STL, STEP |
| Interface | Touchscreen HMI |
Cold spray and part geometry
WarpSPEE3D accelerates powder through a nozzle and bonds material using kinetic energy. The maximum stated part size is cylindrical, Ø1000 × 700 mm, with a 40 kg part limit. The 6 mm deposition spot is not a surface-finish or tolerance specification.
Utilities and qualified materials
Compressed-air capacity is a major installation requirement alongside three-phase power. The technical table names copper and aluminum; introductory copy also mentions aluminum bronze and stainless steel. Those broader materials should be confirmed with the supplier for the chosen process package.
Explore the model family.
An exact introduction year has not been established in the reviewed sources.
Family: Cold spray · Listing status only
Explore SPEE3D through the generationsRead this with the specifications
The page’s introductory list also names aluminum bronze and stainless steel, while its technical table names copper and aluminum. Only the table’s common material entries are retained pending alloy/configuration confirmation.
A larger nominal envelope does not establish better print quality. Fit depends on the configuration, usable area, supports, and orientation.