How the two machines differ on paper: build volume, process, enclosure, nozzle temperature, launch year and the materials each manufacturer names. This is a specification comparison, not a hands-on test.
FFFRaise3D · official manufacturer image
FFFManufacturer image: UltiMakerGenerated from the two sourced profiles on 2026-11-02. Fields a source doesn't establish are left out of the comparison rather than guessed.
Published specifications don't settle print quality, reliability or noise. Compare the exact configuration, bundled accessories, regional price and support with each manufacturer, and check that the materials you need are supported on the configuration you'd buy.
| Specification | Raise3D Pro3 Plus | UltiMaker S7 |
|---|---|---|
| Manufacturer | Raise3D | UltiMaker |
| Printing process | FFF | FFF |
| Build envelope (X × Y × Z) | 300 × 300 × 605 mm | 330 × 240 × 300 mm |
| Nominal box volume | 54.45 L | 23.76 L |
| Enclosure | Enclosed | Enclosed |
| Maximum nozzle temperature | 300 °C | 280 °C |
| Introduction year | 2021 | 2023 |
| Collection | Listing status only | Current / announced |
| Market grouping (editorial) | Professional | Professional |
| Materials named by the manufacturer | PLA, ABS, ASA, PETG, PC, TPU, PVA | Not verified |
| Dual-nozzle build envelope (mm) | 255 × 300 × 605 | Not verified |
| Bed Temperature Max (°C) | 120 | Not verified |
| Filament diameter (mm) | 1.75 | 2.85 |
| Connectivity | Wi-Fi, Ethernet, USB | 2.4/5 GHz Wi-Fi, Ethernet and USB |
| Machine dimensions (mm) | Not verified | 495 × 585 × 800 |
| Machine weight (kg) | Not verified | 29.1 |
| Layer height (µm) | Not verified | 60–400 |
| Maximum Power (W) | Not verified | 500 |
| Display | Not verified | 4.7-inch touchscreen |
| Extrusion System | Not verified | Dual Bowden extrusion with automatic nozzle lifting |
| Build Surface | Not verified | PEI-coated flexible steel |
| Bed Leveling | Not verified | Inductive active leveling |
| Air Filtration | Not verified | Integrated Air Manager with replaceable EPA filter |
| Nominal Air Extraction | Not verified | 35 m³/h at 23°C for most materials |
| Printhead Monitoring | Not verified | Flood detection |
| Slicing Software | Not verified | UltiMaker Cura |
Dual-extrusion Pro3 Plus with interchangeable hotends.
Electronic nozzle lifting supports dual-material work. The quoted main envelope is for single extrusion; dual extrusion narrows usable X to 255 mm. Hyper Speed requires the relevant upgrade.
Full sourced profileS-series printer with integrated Air Manager and a flexible build plate.
S7 adds a flexible steel plate, inductive probing and integrated Air Manager to the S-series workflow. The chamber is enclosed but passively heated.
Full sourced profile