How the two machines differ on paper: build volume, process, enclosure, nozzle temperature, launch year and the materials each manufacturer names. This is a specification comparison, not a hands-on test.
MSLAManufacturer image: ELEGOO
MSLAManufacturer image: AnycubicGenerated from the two sourced profiles on 2026-11-02. Fields a source doesn't establish are left out of the comparison rather than guessed.
Published specifications don't settle print quality, reliability or noise. Compare the exact configuration, bundled accessories, regional price and support with each manufacturer, and check that the materials you need are supported on the configuration you'd buy.
| Specification | ELEGOO Saturn 4 Ultra 16K | Anycubic Photon Mono M7 Pro |
|---|---|---|
| Manufacturer | ELEGOO | Anycubic |
| Printing process | MSLA | MSLA |
| Build envelope (X × Y × Z) | 211.68 × 118.37 × 220 mm | 223 × 126 × 230 mm |
| Nominal box volume | 5.51 L | 6.46 L |
| Enclosure | Not verified | Not verified |
| Maximum nozzle temperature | Not verified | Not verified |
| Introduction year | 2025 | 2024 |
| Collection | Listing status only | Listing status only |
| Market grouping (editorial) | Desktop | Desktop |
| Materials named by the manufacturer | Photopolymer resin | Photopolymer resin |
| LCD resolution (pixels) | 15120 × 6230 | Not verified |
| XY pixel pitch (µm) | 14 × 19 | 16.8 × 24.8 |
| Screen | 10-inch monochrome LCD | Not verified |
| Resin Heating (°C) | 30 | Not verified |
| Release Mechanism | Tilt release | Not verified |
| Bed Leveling | Automatic | Not verified |
| Monitoring Camera | Camera with chamber light and timelapse | Not verified |
| Monitoring Alerts | Empty platform, Warped model | Not verified |
| Layer height (µm) | Not verified | 10–150 |
| Power Rating (W) | Not verified | 240 |
| Machine weight (kg) | Not verified | 12.8 |
| Machine dimensions (mm) | Not verified | 312 × 315 × 520 |
| Release Film | Not verified | Improved ACF |
| Light Source | Not verified | COB with Fresnel optics |
| Vat Heating | Not verified | Included |
LCD resin printer with tilt release and a heated resin tank.
This 16K revision combines a heated tank with tilt-release separation. The source gives a 30 °C resin target. Its pixel grid and build dimensions differ from other Saturn 4 versions.
Full sourced profile10.1-inch 14K monochrome LCD resin printer with a 223 × 126 × 230 mm volume, rated up to 130 mm/h.
The Pro adds dynamic vat temperature control and automatic resin refill/recycling. The specification table lists leveling-free operation and does not list power-loss recovery.
Full sourced profile