{ "checkedOn": "2026-10-16", "scope": "The initial manufacturer-image review plus an expanded file-specific Creative Commons and press-archive review, including historical machines. Exact printer identity, attribution, license and original bytes are recorded for each displayed image.", "methodology": "Read official manufacturer policies and media resources, inspect asset-specific grants and exact model evidence, and preserve source links and conditions. Public availability or attribution alone is not treated as a reuse license. Restricted means a published copying restriction was found with no applicable exception verified for the catalog assets. Unclear means permission was not established, not that reuse is categorically forbidden. Statutory exceptions such as fair use were not used as the publication basis. No manufacturer was contacted.", "summary": { "brandsReviewed": 25, "existingPhotosReviewed": 11, "existingPhotosWithheld": 11, "catalogProfiles": 585, "profilesWithIllustrations": 18, "brandsRepresented": 209, "photosUsed": 567, "initialOfficialPhotosUsed": 1, "additionalPhotosUsed": 15, "creativeCommonsPhotosUsed": 13, "verifiedPermissionImagesUsed": 16, "manufacturerImagesWithUnverifiedPermission": 551, "manufacturerRecordsOutsideImagePolicyReview": 182 }, "brands": [ { "brand": "3D Systems", "status": "restricted", "policyUrl": "https://www.3dsystems.com/term-use", "policyTitle": "3D Systems Terms of Use", "permissionQuote": "for personal, non-commercial use only", "scope": "General website materials have a narrow personal/noncommercial allowance; the audited public editorial catalog use is not covered by an explicit image reuse grant.", "conditions": [ "Obtain written permission or a separately verified media-asset license before publishing product images on the site.", "Do not mirror ordinary site materials to another server based only on the download allowance." ], "notes": "Read https://www.3dsystems.com/term-use , including its use restrictions and prohibition on mirroring without written permission. Checked https://www.3dsystems.com/press-releases and read current SLA 750 and SLS 380 product pages at https://www.3dsystems.com/3d-printers/sla-750 and https://www.3dsystems.com/3d-printers/sls-380 . No specific press-image license was found. A bounded Flickr/Commons search surfaced third-party Creative Tools and John Abella photos of older machines, not manufacturer-uploaded licensed photographs of the catalog models. The 2017 brand-book search result was not treated as an image license.", "checkedOn": "2026-10-15", "displaySummary": "General website terms limit reuse. No applicable license for the catalog photos was verified." }, { "brand": "Anycubic", "status": "restricted", "policyUrl": "https://uk.anycubic.com/pages/disclaimer", "policyTitle": "Disclaimer — Intellectual Right-of-Ownership", "permissionQuote": "The visitor must obtain express written permission from the Anycubic Group", "scope": "Anycubic.com text, illustrations, images, logos and databases.", "conditions": [ "Express written permission is required for reproduction or public use." ], "notes": "The official disclaimer explicitly restricts full or partial reproduction. No applicable public editorial photo license was found. The store terms concern user submissions licensed to Anycubic, not manufacturer photos licensed to visitors.", "supportingUrls": [ "https://store.anycubic.com/policies/terms-of-service" ], "checkedOn": "2026-10-15", "displaySummary": "The official disclaimer requires express written permission for reproduction. No applicable photo exception was verified." }, { "brand": "Artillery", "status": "restricted", "policyUrl": "https://www.artillery3d.com/pages/terms-of-service", "policyTitle": "Terms of Service — Section 2", "permissionQuote": "without express written permission by us.", "scope": "The Artillery website and service.", "conditions": [ "Express written permission is required for copying or reproducing the service." ], "notes": "No public editorial photo license or press-asset exception was found. The contact page offers media inquiries but grants no reuse rights; no contact was made.", "supportingUrls": [ "https://artillery3d.com/pages/contact-us" ], "checkedOn": "2026-10-15", "displaySummary": "Website copying requires express permission. No editorial-photo license was found." }, { "brand": "Bambu Lab", "status": "unclear", "policyUrl": "https://bambulab.com/en/policies/terms", "policyTitle": "Bambu Lab Terms of Use", "permissionQuote": "", "scope": "No explicit permission for republication of manufacturer product photography on an independent editorial website was found.", "conditions": [ "Keep official product photos out of the publishable set until an applicable grant is recorded.", "Do not extend software, printable-model, or user-submission licenses to manufacturer product photographs." ], "notes": "Verified H2C photograph on the official November 14, 2025 announcement. Main H2C page and Terms of Use were ultimately retrieved successfully with direct HTTP after web-tool fetch errors. The terms describe the printer/device and its software, rather than a press-photo license. The H2C page links these terms but no press/media policy was found. US store /policies/terms-of-service returned HTTP 404. This outcome is unresolved permission, not an affirmative manufacturer ban. No contact was made.", "checkedOn": "2026-10-15", "displaySummary": "An exact H2C photo was located on the official launch article, but permission to republish it was not established." }, { "brand": "Comgrow", "status": "restricted", "policyUrl": "https://www.comgrow.com/pages/Terms-of-Service", "policyTitle": "Terms of Service — Section 2", "permissionQuote": "without express written permission by us.", "scope": "The Comgrow website and service.", "conditions": [ "Express written permission is required for copying or reproducing the service." ], "notes": "No public editorial photo license was found. The catalog's T300 listing is hosted by Sovol; Comgrow's terms do not grant rights to that separate page or its photography.", "supportingUrls": [ "https://www.sovol3d.com/products/comgrow-t300-3d-printer" ], "checkedOn": "2026-10-15", "displaySummary": "No editorial-photo license was found. The T300 listing is hosted on Sovol, whose image rights also need to be considered." }, { "brand": "Creality", "status": "restricted", "policyUrl": "https://www.creality.com/resources/legal-information", "policyTitle": "Creality Legal Information", "permissionQuote": "Written permission from Creality is required to use the text or graphics in this site.", "scope": "Creality website text and graphics, including the two existing K2-series manufacturer product images.", "conditions": [ "Written permission is required under the published policy; none is recorded in the project.", "Attribution and a no-endorsement statement do not supply the missing permission." ], "notes": "Official page explicitly states the permission requirement. No specific press-photo grant overriding this condition was found in the bounded search. Existing K2 Plus and K2 Pro assets were matched to their exact model alt labels on the official K2 series page.", "checkedOn": "2026-10-15", "displaySummary": "Exact K2 Plus and K2 Pro photos were confirmed. The official policy requires written permission for website graphics." }, { "brand": "ELEGOO", "status": "restricted", "policyUrl": "https://www.elegoo.com/pages/terms-of-service", "policyTitle": "ELEGOO Terms of Service, Section 5: License to Use Website", "permissionQuote": "Republish material from the Website (including republication on another website)", "scope": "The website license is personal use; its exclusions include republication on another website. An exception exists for content specifically and expressly made available for redistribution, but that exception was not established for these photos.", "conditions": [ "Use a specific express redistribution grant or separate permission before republishing these product images.", "Do not treat the user-content license granted to ELEGOO as a license granted to this website." ], "notes": "Canonical /pages/terms-of-service retrieved directly and the same policy verified at https://www.elegoo.com/en-gb/pages/terms-of-service. The main footer's /pages/terms currently shows software/service terms, so the photo audit uses the distinct website policy. Existing Saturn 4 Ultra 16K, Jupiter 2, and Mars 5 Ultra images were matched to exact product cards/links in official HTML. A third-party design-award media kit was found but not accepted as an official-manufacturer image grant under this audit's source rule.", "checkedOn": "2026-10-15", "displaySummary": "The website policy excludes republication unless content is expressly made available for redistribution. No such exception was verified for the three existing photos." }, { "brand": "EOS", "status": "permitted", "policyUrl": "https://www.eos.info/press-media/press-center/media", "policyTitle": "EOS Media Kit", "permissionQuote": "can be used for press-related purposes without permission, provided that the source is cited (Source: EOS).", "scope": "EOS-owned photographs in the official media kit may be reproduced for press-related editorial purposes with source credit. This scoped finding applies to the two exact kit assets below, not every image on eos.info.", "conditions": [ "Credit exactly: Source: EOS.", "Use for press-related editorial coverage; do not imply manufacturer endorsement.", "If a particular asset names a third-party owner, follow that corresponding image-source requirement. No third-party credit was displayed for the two inspected EOS Systems assets.", "If coverage is published, EOS asks for a copy at press@eos.info. No copy has been sent for this local preview." ], "notes": "Read the media-kit page and followed its EOS Systems link to https://brandhub.eos.info/share/7ecpbXDqbBPnoCmAJwZo/collections/48 . Inspected both individual asset detail pages, their model names, image src URLs, sizes, and formats. The broader https://www.eos.info/press-media/press-center/press-releases page says press reproduction is free of charge but subject to approval. That broader notice conflicts with the specific media kit's no-prior-permission statement; the permission conclusion is narrowly based on the specific kit grant and kit assets. Local editorial preview is within the scoped use; retain this evidence and handle the requested publication-copy follow-up if the coverage is published.", "checkedOn": "2026-10-15", "displaySummary": "The media kit permits credited press-related use of EOS-owned imagery. The M 290 asset was verified and included; this permission does not cover arbitrary EOS website images." }, { "brand": "Flashforge", "status": "restricted", "policyUrl": "https://www.flashforge.com/pages/terms-of-service", "policyTitle": "Terms of Service — General Conditions", "permissionQuote": "without express written permission by us.", "scope": "The Flashforge website and service.", "conditions": [ "Express written permission is required for copying or reproducing the service." ], "notes": "The official Press & Media page offers product-image downloads, brand guidelines and media-contact guidelines, but its visible text contains no explicit reuse grant. Linked guideline downloads could not be retrieved by the research tool. Download availability alone was not accepted as permission.", "supportingUrls": [ "https://www.flashforge.com/pages/press" ], "checkedOn": "2026-10-15", "displaySummary": "Press downloads are available, but a reuse grant was not verified. Linked guideline files could not be retrieved during this review." }, { "brand": "FLSUN", "status": "restricted", "policyUrl": "https://store.flsun3d.com/pages/flsun-terms-of-service", "policyTitle": "FLSUN Terms of Service — Section 4, updated June 17, 2025", "permissionQuote": "Except as explicitly permitted by these Terms, you may not use, copy, or transfer any rights to these materials.", "scope": "Site content and related intellectual property.", "conditions": [ "A separate applicable authorization is required for copying site content." ], "notes": "The published software license is limited to purchased devices and does not authorize product-photo republication. No editorial image exception was found.", "checkedOn": "2026-10-15", "displaySummary": "General terms restrict copying. The device-software license does not grant rights to marketing photographs." }, { "brand": "Formlabs", "status": "unclear", "policyUrl": "https://formlabs.com/company/press/", "policyTitle": "Formlabs Press and 2026 Media Kit", "permissionQuote": "", "scope": "No explicit reuse grant was located for the existing Form 4 or Fuse 1+ 30W product-page photos, or the inspected 2026 Google Drive image folder. A separate official Flickr program grants CC BY 2.0 for designated Flickr assets, not all Formlabs imagery.", "conditions": [ "Hold the existing Form 4 and Fuse 1+ 30W site photos unless permission for those exact files is established or a specifically licensed replacement is selected.", "For an asset in the official Flickr Creative Commons program, follow its individual license, credit Formlabs Inc., link the specified Formlabs page and the CC BY 2.0 license, and disclose modifications.", "Do not transfer the Flickr grant to an unrelated product-page image or substitute an older printer image for a current variant." ], "notes": "Read https://formlabs.com/company/press/ and followed Download Media Kit to https://drive.google.com/drive/folders/1waUmqnktTyqqEwKLcZLrWeRXJ9HjkbWn?usp=sharing . Inspected its Formlabs Media Kit folder and Images folder https://drive.google.com/drive/folders/1Jh5qCrusktX6JceMnky6XXYX-vNQs94Y : product image files were visible, but no license/readme was visible in the inspected root or image folder. Download availability is not proof of reuse permission. Read https://formlabs.com/terms-of-service/ , whose general terms require express written permission for reproduction/exploitation. Separately read the official announcement https://forum.formlabs.com/t/formlabs-images-now-available-under-creative-commons/22191 and followed its link to https://www.flickr.com/people/161389331@N04/ ; this establishes the Formlabs Inc. account's official provenance. The announcement provides CC BY 2.0 for the designated Flickr program. The account lists 44 photographs and the indexed examples inspected depict Form 2-era equipment. No licensed exact Form 4 or Fuse 1+ 30W asset was found in this bounded check. Both existing local photos were visually inspected.", "checkedOn": "2026-10-15", "displaySummary": "A separate official Flickr program provides Creative Commons photos. No licensed exact match for Form 4 or Fuse 1+ 30W was found; the existing photos remain withheld." }, { "brand": "HeyGears", "status": "unclear", "policyUrl": "https://store.heygears.com/policies/terms-of-service", "policyTitle": "HeyGears Store Service Agreement, Section VII: Intellectual Property Rights", "permissionQuote": "All products, technology, and programs on our website are our intellectual property.", "scope": "No explicit editorial photograph reuse grant was found for the store's UltraCraft Reflex RS image.", "conditions": [ "Keep the image out of the cleared publication set until applicable permission is documented.", "Do not assume that a downloadable product icon or attribution supplies reuse permission." ], "notes": "Store policy reserves rights and refers to copying/displaying products, technology and programs without permission, but it does not provide a clear photograph-specific editorial grant. Separate https://bshop.heygears.com/terms explicitly discusses photographs and limits content use; its scope is a separate shop, so it is not treated as an automatic license or definitive ban for this store asset. Existing printer-icon.webp is labeled 'rs 3d printer' in the Reflex RS product page's box-contents section. No contact was made.", "checkedOn": "2026-10-15", "displaySummary": "The Reflex RS icon is associated with the exact model on the official page, but its editorial reuse permission was not established." }, { "brand": "HP", "status": "restricted", "policyUrl": "https://www.hp.com/country/us/en/termsofuse.html", "policyTitle": "HP Terms of Use and asset-specific rights requirements", "permissionQuote": "You may not modify, publicly display, publicly perform, or distribute the Materials.", "scope": "Ordinary HP product website materials. A specific Asset Hub license may provide different rights, but no qualifying license was verified for the three Jet Fusion candidates below.", "conditions": [ "Read the individual Asset Hub image's usage rights and download terms before publication; public availability alone is insufficient.", "Do not interpret unlimited use for HP projects as permission for an independent public website.", "Resolve the 5200-versus-5210 image identity before using that candidate as an exact 5200 card photo." ], "notes": "Read HP's terms at the policy URL (displayed revision July 2009), the press-kit listing https://www.hp.com/us-en/newsroom/press-kits.html and product comparison page https://www.hp.com/us-en/printers/3d-printers/products.html . The official Asset Hub FAQ search evidence at https://h71069.www7.hp.com/assethub-resourcecenter/us/en/faq.html explains that rights are asset-specific in metadata and download terms; its unlimited brand-team images apply to HP projects. No exact Jet Fusion asset-specific grant was retrieved. press.hp.com returned 403. The candidate URLs below were exposed as image links on HP's comparison page; the image fetches returned tool errors, so the actual raster contents were not visually verified. The 5200 candidate's filename refers to 5210 despite a 5200 page caption.", "checkedOn": "2026-10-15", "displaySummary": "Asset Hub rights vary by image. No applicable asset-specific grant was verified for the Jet Fusion candidates." }, { "brand": "Kingroon", "status": "restricted", "policyUrl": "https://kingroon.com/pages/terms-of-service", "policyTitle": "Terms of Service — Section 2, last updated August 2023", "permissionQuote": "without express written permission by us.", "scope": "The Kingroon website and service.", "conditions": [ "Express written permission is required for copying or reproducing the service." ], "notes": "No public editorial photo license or press-asset exception was found.", "checkedOn": "2026-10-15", "displaySummary": "Website copying requires express permission. No editorial-photo exception was verified." }, { "brand": "MakerBot", "status": "asset-specific", "policyUrl": "https://commons.wikimedia.org/wiki/File:MakerBot_-_Replicator_2_02.jpg", "policyTitle": "File-specific photograph source", "scope": "Only individually licensed photographs are included. No general manufacturer-site reuse grant is asserted.", "notes": "New historical collection. Any displayed photo has separate creator, source and reuse evidence.", "displaySummary": "Historical model imagery is checked per file. Included Creative Commons photos carry creator and license links on their model profiles.", "conditions": [], "checkedOn": "2026-10-16" }, { "brand": "Peopoly", "status": "restricted", "policyUrl": "https://peopoly.net/pages/terms-of-service", "policyTitle": "Terms of Service — Section 2", "permissionQuote": "without express written permission by us.", "scope": "The Peopoly website and service.", "conditions": [ "Express written permission is required for copying or reproducing the service." ], "notes": "No public editorial photo license or press-asset exception was found.", "checkedOn": "2026-10-15", "displaySummary": "Website copying requires express permission. No editorial-photo exception was verified." }, { "brand": "Phrozen", "status": "unclear", "policyUrl": "https://us.phrozen3d.com/policies/terms-of-service", "policyTitle": "Terms of service — Usage Restrictions and Prohibited Uses", "permissionQuote": "", "scope": "Phrozen website content.", "conditions": [], "notes": "The reviewed terms retain intellectual-property protections without granting public editorial photo reuse. A separate affiliate agreement licenses company IP only to accepted affiliates in good standing for affiliate-link promotion; that conditional grant does not establish permission for 3Dprintsy.", "supportingUrls": [ "https://phrozen3d.com/en-hk/pages/affiliate-program-agreement-phrozen" ], "checkedOn": "2026-10-15", "displaySummary": "No public editorial-photo grant was found. The conditional affiliate license does not establish permission for this site." }, { "brand": "Prusa", "status": "permitted", "policyUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "policyTitle": "General press package: !credits-readme-first.txt; separate model archives and Media Assets page", "permissionQuote": "All photos and logos in the package are ready for immediate release worldwide.", "scope": "Explicit grant applies to assets inside prusaresearch.zip only. No applicable express grant was established for the current catalog photos or separate MK4S/CORE One archives.", "conditions": [ "For assets actually in this package, use (c) Prusa Polymers - prusa3d.com except the two specifically named portrait files.", "For prusa19166.jpg and prusa19227.jpg, use (c) David Turecky for Forbes.cz.", "Do not substitute MK4, MK3S, MINI, SL1, original XL, CORE One, or CORE One L imagery for a different catalog model or generation." ], "notes": "Public media page https://www.prusa3d.com/page/media-assets_987/ links the general archive and separate model archives. Direct HTTP inspection succeeded: general archive 36 entries, including !credits-readme-first.txt; MK4S archive https://www.prusa3d.com/downloads/press/OriginalPrusaMK4S.zip 182 entries with no TXT/MD/PDF/HTML/RTF license documents; CORE One archive https://www.prusa3d.com/downloads/press/COREOne-Mediakit.zip 48 entries with no such documents. General package contains MK4_KIT_high_res (2).jpg, mk3s02.jpg, mini14.jpg and sl101.jpg, not an identified exact MK4S or CORE One+ Gen 2 product image. Its package-specific grant is not extended to other downloads. Brand manual at https://backend.prusa3d.com/wp-content/uploads/2025/10/Prusa_brand_manual.zip was read: presentation/photo-composition guidance, no separate editorial-photo license. Status concerns the requested catalog photos; it does not deny the narrow general-package grant. Full original README text is preserved locally at research/prusa-general-press-README.txt; line endings are normalized. No exact current catalog printer was identified in that licensed bundle.", "checkedOn": "2026-10-16", "displaySummary": "The general press ZIP explicitly permits its contents. Exact MK3S and SL1 photographs from that package are included, alongside independently licensed MK4 and MINI+ images. The earlier MK4S and CORE One photos remain withheld." }, { "brand": "QIDI", "status": "restricted", "policyUrl": "https://qidi3d.com/pages/terms-of-service", "policyTitle": "Terms of Service — Section 2", "permissionQuote": "without express written permission by us.", "scope": "The QIDI website and service.", "conditions": [ "Express written permission is required for copying or reproducing the service." ], "notes": "No public editorial photo license or press-asset exception was found. Public press releases and affiliate-program availability were not treated as image licenses.", "checkedOn": "2026-10-15", "displaySummary": "Website copying requires express permission. Press releases and affiliate availability do not establish an image license." }, { "brand": "Raise3D", "status": "unclear", "policyUrl": "https://www.raise3d.com/legal/terms-of-use/", "policyTitle": "Raise3D Terms of Use", "permissionQuote": "a limited, non-exclusive, and non-transferable license to use our Services for your personal and business use", "scope": "General license to use Raise3D services; no express permission to republish product photographs on an independent editorial website was established.", "conditions": [ "Do not treat the license to use services as permission to redistribute their photographs.", "Verify an asset-specific media grant or obtain written permission before publishing a Raise3D photograph." ], "notes": "Read sections 4 and 5 of the terms: Raise3D retains rights in content including images and restricts unauthorized reproduction/distribution. Checked the official press and contact results at https://www.raise3d.com/press/ and https://www.raise3d.com/contact/ ; these provide a press contact rather than an express public photo-reuse grant. Read https://www.raise3d.com/raise3d-pro3-hs-series/ for model context. No official asset-specific Creative Commons grant was found in the bounded search. No contact was made.", "checkedOn": "2026-10-15", "displaySummary": "A general license to use services does not expressly permit product-photo republication. No applicable asset license was found." }, { "brand": "RepRap", "status": "asset-specific", "policyUrl": "https://commons.wikimedia.org/wiki/File:RepRap_Darwin_4.jpg", "policyTitle": "File-specific photograph source", "scope": "Only individually licensed photographs are included. No general manufacturer-site reuse grant is asserted.", "notes": "New historical collection. Any displayed photo has separate creator, source and reuse evidence.", "displaySummary": "Historical model imagery is checked per file. Included Creative Commons photos carry creator and license links on their model profiles.", "conditions": [], "checkedOn": "2026-10-16" }, { "brand": "Sinterit", "status": "unclear", "policyUrl": "https://sinterit.com/company/pressroom/", "policyTitle": "Pressroom — Media kit", "permissionQuote": "", "scope": "Pressroom brand imagery and product photography.", "conditions": [], "notes": "The official pressroom offers logos, photos and a Brand Imagery download, but no explicit editorial reuse terms were found in the visible page or targeted official-domain searches. No download link was treated as a license.", "checkedOn": "2026-10-15", "displaySummary": "The official pressroom offers brand imagery, but no express reuse terms were verified." }, { "brand": "Snapmaker", "status": "restricted", "policyUrl": "https://www.snapmaker.com/en-EU/terms-of-use", "policyTitle": "Terms of Use — Section 8, updated June 10, 2026", "permissionQuote": "Users are not allowed to use these materials unless expressly authorized by Snapmaker.", "scope": "Snapmaker website, product and service content and intellectual property.", "conditions": [ "Express authorization is required for use of protected materials." ], "notes": "The U1 press page labels a collection as media-approved assets and offers downloads. It does not expose an explicit editorial republication license or scope sufficient to override the restrictive general terms in this audit. No image was approved on that basis.", "supportingUrls": [ "https://press.snapmaker.com/" ], "checkedOn": "2026-10-15", "displaySummary": "Media-approved downloads are offered, but their reuse scope was not established sufficiently to resolve the restrictive general website terms." }, { "brand": "Sovol", "status": "restricted", "policyUrl": "https://www.sovol3d.com/pages/terms-and-conditions", "policyTitle": "Sovol Terms of Service, Section 2", "permissionQuote": "without express written permission by us.", "scope": "Website/service reproduction, duplication and copying require express written permission; no independent editorial-image reuse grant was established.", "conditions": [ "Obtain applicable written permission before republishing the website photographs.", "Open-source printer hardware does not establish a license for its marketing photographs." ], "notes": "The SV08 existing photo is present on its official product page and explicitly identified as SV08. Searches of Sovol's official site did not produce a specific public press-photo license. Contest rules granting Sovol rights in entrant submissions are not a grant to 3Dprintsy.", "checkedOn": "2026-10-15", "displaySummary": "The existing SV08 photo matches the model. No applicable reuse grant was found; open-source hardware does not license marketing photography." }, { "brand": "Stratasys", "status": "restricted", "policyUrl": "https://www.stratasys.com/en/legal/legal-information/", "policyTitle": "Stratasys Legal Information; limited COVID-19 press-kit exception", "permissionQuote": "Written permission from Stratasys is required to use the text or graphics in this site.", "scope": "General product catalog imagery is restricted absent permission. A separate affirmative sharing grant applies to the COVID-19 press-kit assets, but no exact catalog-model photo was identified there.", "conditions": [ "Obtain permission or a specific asset license before publishing ordinary printer catalog photographs.", "The COVID-19 kit's affirmative sharing permission applies only to assets contained on that kit page; do not extend it to linked general product pages.", "Do not use the kit's generic hospital printer-farm photograph as a specific model card without exact model identification." ], "notes": "Read the legal page and https://www.stratasys.com/en/covid-19/press-kit/ . The latter expressly says its assets are for public consumption and may be shared. Its downloadable image https://www.stratasys.com/siteassets/covid-19/press-kit/stratasys-3d-printers-hospital-cropped.jpg?v=48fc31 was observed via the caption link, which describes a Paris hospital's 60 FDM printers without naming exact models. It can be considered for matching historical coverage under the scoped kit grant; it is not added as an exact current-model candidate. Read the FDM catalog page https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/ . A Flickr result labelled Stratasys Brazil showed all rights reserved, and no official Creative Commons current-model asset was established. The generic restriction does not override the specific COVID-kit sharing grant.", "checkedOn": "2026-10-15", "displaySummary": "A specific COVID-19 kit permits sharing its assets, but no exact catalog-model photo was identified there. General product imagery still requires permission." }, { "brand": "UltiMaker", "status": "restricted", "policyUrl": "https://ultimaker.com/legal/terms-of-use/", "policyTitle": "UltiMaker Terms of Use, updated March 13, 2026", "permissionQuote": "You may not: (a) copy, modify, distribute or publicly display content from the Sites", "scope": "Ordinary website product imagery, including the S8 page; no specific editorial reuse license was verified in this audit.", "conditions": [ "Obtain written permission or a separately verified asset-specific license before publishing ordinary UltiMaker website images.", "A third-party Creative Commons photograph is not an official manufacturer photograph and must be credited to its actual photographer." ], "notes": "Read the current terms and https://ultimaker.com/press/ . The press page invites requests for brand/product visuals, but no downloadable grant was visible. Read https://ultimaker.com/3d-printers/s-series/ultimaker-s8/ as the catalog product context. Bounded searches for official UltiMaker Flickr and manufacturer-uploaded Commons imagery did not establish an official account or an exact S8 license. https://commons.wikimedia.org/wiki/File:Ultimaker_S5_printer_2018.jpg explicitly credits Svitlana Lozova and CC BY-SA 4.0; it is a third-party 2018 S5 photograph, so it was not added to the official-image candidates. The official support article https://support.ultimaker.com/s/article/1667337576879 distinguishes S5R1 from S5R2, making an older photo a variant-sensitive choice. This restriction finding does not negate any separately verified individual Creative Commons grant.", "checkedOn": "2026-10-15", "displaySummary": "The press page invites requests for visuals. No official, licensed exact-model photo was found for the current catalog entry." }, { "brand": "UniFormation", "status": "unclear", "policyUrl": "https://uniformation3d.com/policies/terms-of-service", "policyTitle": "Terms of service — Prohibited Uses", "permissionQuote": "", "scope": "UniFormation website content.", "conditions": [], "notes": "The reviewed terms protect intellectual property and contain no public editorial image-reuse grant. No applicable press or Creative Commons license was found.", "checkedOn": "2026-10-15", "displaySummary": "No applicable editorial image-reuse grant was verified in the reviewed terms or official resources." } ], "existingImages": [ { "printerId": "creality-k2-plus", "decision": "withheld", "previousAsset": "/assets/products/creality-k2-plus.webp", "sourcePage": "https://www.creality.com/products/k2-series-3d-printer", "originalUrl": "https://compress-file.creality.com/images/Agent/08a0a98d-19e4-4122-b5b0-0507f37dbb7a.webp", "modelMatch": "verified", "policyUrl": "https://www.creality.com/resources/legal-information", "reason": "Existing /assets/products/creality-k2-plus.webp. Official page identifies this exact asset with K2 Plus alt text. Published policy requires written permission; current provenance's attribution statement is insufficient." }, { "printerId": "sovol-sv08", "decision": "withheld", "previousAsset": "/assets/products/sovol-sv08.jpg", "sourcePage": "https://www.sovol3d.com/products/sovol-sv08-3d-printer", "originalUrl": "https://www.sovol3d.com/cdn/shop/files/Sovol_SV08_3D_Printer_Product_View.jpg?v=1782979511&width=1200", "modelMatch": "verified", "policyUrl": "https://www.sovol3d.com/pages/terms-and-conditions", "reason": "Existing /assets/products/sovol-sv08.jpg. Official image alt identifies the SV08 CoreXY printer; this is not the SV08 Max. Website copying requires written permission and none was found." }, { "printerId": "creality-k2-pro", "decision": "withheld", "previousAsset": "/assets/products/creality-k2-pro.png", "sourcePage": "https://www.creality.com/products/k2-series-3d-printer", "originalUrl": "https://cdn.creality.com/ow/official/39372408-8328-4181-9aef-7b941dd46779.png", "modelMatch": "verified", "policyUrl": "https://www.creality.com/resources/legal-information", "reason": "Existing /assets/products/creality-k2-pro.png. Official page identifies this exact asset with K2 Pro alt text. Published policy requires written permission; current provenance contains no grant." }, { "printerId": "elegoo-saturn-4-ultra-16k", "decision": "withheld", "previousAsset": "/assets/products/elegoo-saturn-4-ultra-16k.jpg", "sourcePage": "https://www.elegoo.com/collections/3d-printing/products/saturn-4-ultra-16k-10inch-monochrome-lcd-resin-3d-printer", "originalUrl": "https://www.elegoo.com/cdn/shop/files/S4U-16K.jpg?v=1743670697&width=345", "modelMatch": "verified", "policyUrl": "https://www.elegoo.com/pages/terms-of-service", "reason": "Existing /assets/products/elegoo-saturn-4-ultra-16k.jpg. Same asset is associated with Saturn 4 Ultra 16K alt text and exact product link. No express redistribution exception established." }, { "printerId": "formlabs-form-4", "decision": "withheld", "previousAsset": "/assets/products/formlabs-form-4.webp", "sourcePage": "https://formlabs.com/3d-printers/form-4/", "originalUrl": "https://formlabs.com/_next/image/?q=75&url=https%3A%2F%2Fformlabs-media.formlabs.com%2Ffiler_public%2F62%2Fd4%2F62d4c43b-7f4e-4e42-9de9-86b71edbfd24%2Fformlabs_f4_front_cover_closed_eng_light_ik_240321_store_noshadow.png&w=3840", "modelMatch": "verified", "policyUrl": "https://formlabs.com/company/press/", "reason": "Existing site photo audited at site/public/assets/products/formlabs-form-4.webp. Official page image link labels it Form 4 3D Printer, and the local raster visibly identifies Form 4. Exact model verified, but no affirmative reuse grant was found for this file. The separate Flickr CC program does not establish permission for this product-page file. Hold pending an exact asset grant or licensed replacement." }, { "printerId": "formlabs-fuse-1-plus-30w", "decision": "withheld", "previousAsset": "/assets/products/formlabs-fuse-1-plus-30w.webp", "sourcePage": "https://formlabs.com/3d-printers/fuse-1/", "originalUrl": "https://formlabs.com/_next/image/?q=75&url=https%3A%2F%2Fformlabs-media.formlabs.com%2Ffiler_public%2F48%2F24%2F482464e8-9e4a-43a8-8d11-5c270b40c878%2Fformlabs_2021_fuse_002.png&w=3840", "modelMatch": "unverified", "policyUrl": "https://formlabs.com/company/press/", "reason": "Existing site photo audited at site/public/assets/products/formlabs-fuse-1-plus-30w.webp. The current manufacturer page labels the linked image Fuse 1+ 30W, supporting its association, but the filename references 2021 and the visible cabinet does not identify the 30W variant. exactModel=false means the exact variant remains unverified, not that a mismatch was proven. No affirmative reuse grant was found for this file. Hold for both rights and exact-variant verification." }, { "printerId": "elegoo-jupiter-2", "decision": "withheld", "previousAsset": "/assets/products/elegoo-jupiter-2.jpg", "sourcePage": "https://www.elegoo.com/collections/3d-printing/products/elegoo-jupiter-2", "originalUrl": "https://www.elegoo.com/cdn/shop/files/JPT2.jpg?v=1775530749&width=345", "modelMatch": "verified", "policyUrl": "https://www.elegoo.com/pages/terms-of-service", "reason": "Existing /assets/products/elegoo-jupiter-2.jpg. Same asset is identified by Jupiter 2 product-card alt text and product link. This is not Jupiter SE. No express redistribution exception established." }, { "printerId": "elegoo-mars-5-ultra", "decision": "withheld", "previousAsset": "/assets/products/elegoo-mars-5-ultra.jpg", "sourcePage": "https://www.elegoo.com/collections/3d-printing/products/mars-5-ultra-9k-7inch-monochrome-lcd-resin-3d-printer", "originalUrl": "https://www.elegoo.com/cdn/shop/files/f91c887f39b07095c6453b328b4b84cd_89b6a8ea-eb64-49b7-a161-96c53389bb6d.jpg?v=1748253800&width=345", "modelMatch": "verified", "policyUrl": "https://www.elegoo.com/pages/terms-of-service", "reason": "Existing /assets/products/elegoo-mars-5-ultra.jpg. Same asset is identified by Mars 5 Ultra product-card alt text and exact link. No express redistribution exception established." }, { "printerId": "heygears-ultracraft-reflex-rs", "decision": "withheld", "previousAsset": "/assets/products/heygears-ultracraft-reflex-rs.png", "sourcePage": "https://store.heygears.com/products/ultracraft-reflex-rs-3d-printer", "originalUrl": "https://store.heygears.com/cdn/shop/files/printer-icon.webp?v=1732936774&width=640", "modelMatch": "verified", "policyUrl": "https://store.heygears.com/policies/terms-of-service", "reason": "Existing /assets/products/heygears-ultracraft-reflex-rs.png. Official Reflex RS box-contents section labels the asset as the RS printer. No editorial-photo reuse permission established." }, { "printerId": "prusa-mk4s", "decision": "withheld", "previousAsset": "/assets/products/prusa-mk4s.png", "sourcePage": "https://www.prusa3d.com/p/prusa-3d-printers/", "originalUrl": "https://assets.prusa3d.com/cdn-cgi/image/width%3D1200%2Cheight%3D1200%2Cquality%3D85%2Cformat%3Dauto/b944a8a7-93e6-49b8-8a4c-1a006dc7904a.png", "modelMatch": "verified", "policyUrl": "https://www.prusa3d.com/page/media-assets_987/", "reason": "Existing /assets/products/prusa-mk4s.png. Official lineup labels this asset Prusa MK4S. It was not identified inside the expressly granted general press archive; that archive's MK4 photo is a different model. Separate MK4S archive has no license/readme document. Rights remain unclear." }, { "printerId": "prusa-core-one-gen-2", "decision": "withheld", "previousAsset": "/assets/products/prusa-core-one-gen-2.png", "sourcePage": "https://www.prusa3d.com/p/prusa-3d-printers/", "originalUrl": "https://assets.prusa3d.com/cdn-cgi/image/width%3D1200%2Cheight%3D1151%2Cquality%3D85%2Cformat%3Dauto/f1a912e3-b743-467d-abc6-cbd4959073a2.png", "modelMatch": "verified", "policyUrl": "https://www.prusa3d.com/page/media-assets_987/", "reason": "Existing /assets/products/prusa-core-one-gen-2.png. Official lineup uses this asset within the card headed CORE One+ (Gen 2), establishing the exact current model association. Separate older CORE One media-kit images were not substituted. No applicable reuse grant was established for this lineup asset." } ], "candidates": [ { "printerId": "bambu-lab-h2c", "url": "https://storage.ghost.io/c/8d/d9/8dd9f85b-21c3-4782-bba8-8778cd8f2f93/content/images/size/w1200/2025/11/Bambu-Lab-H2C.jpg", "sourcePage": "https://blog.bambulab.com/bambu-lab-h2c-where-multi-material-vortek-system-meets-engineering-precision/", "policyUrl": "https://bambulab.com/en/policies/terms", "credit": "Bambu Lab", "notes": "New candidate, not cleared for republication. Official article's hero-image link and alt text identify H2C exactly. Rights remain unclear; do not replace the placeholder with this photo on the basis of availability alone.", "exactModel": true }, { "printerId": "creality-k2-plus", "url": "https://compress-file.creality.com/images/Agent/08a0a98d-19e4-4122-b5b0-0507f37dbb7a.webp", "sourcePage": "https://www.creality.com/products/k2-series-3d-printer", "policyUrl": "https://www.creality.com/resources/legal-information", "credit": "Creality", "notes": "Existing /assets/products/creality-k2-plus.webp. Official page identifies this exact asset with K2 Plus alt text. Published policy requires written permission; current provenance's attribution statement is insufficient.", "exactModel": true }, { "printerId": "creality-k2-pro", "url": "https://cdn.creality.com/ow/official/39372408-8328-4181-9aef-7b941dd46779.png", "sourcePage": "https://www.creality.com/products/k2-series-3d-printer", "policyUrl": "https://www.creality.com/resources/legal-information", "credit": "Creality", "notes": "Existing /assets/products/creality-k2-pro.png. Official page identifies this exact asset with K2 Pro alt text. Published policy requires written permission; current provenance contains no grant.", "exactModel": true }, { "printerId": "sovol-sv08", "url": "https://www.sovol3d.com/cdn/shop/files/Sovol_SV08_3D_Printer_Product_View.jpg?v=1782979511&width=1200", "sourcePage": "https://www.sovol3d.com/products/sovol-sv08-3d-printer", "policyUrl": "https://www.sovol3d.com/pages/terms-and-conditions", "credit": "Sovol", "notes": "Existing /assets/products/sovol-sv08.jpg. Official image alt identifies the SV08 CoreXY printer; this is not the SV08 Max. Website copying requires written permission and none was found.", "exactModel": true }, { "printerId": "elegoo-saturn-4-ultra-16k", "url": "https://www.elegoo.com/cdn/shop/files/S4U-16K.jpg?v=1743670697&width=345", "sourcePage": "https://www.elegoo.com/collections/3d-printing/products/saturn-4-ultra-16k-10inch-monochrome-lcd-resin-3d-printer", "policyUrl": "https://www.elegoo.com/pages/terms-of-service", "credit": "ELEGOO", "notes": "Existing /assets/products/elegoo-saturn-4-ultra-16k.jpg. Same asset is associated with Saturn 4 Ultra 16K alt text and exact product link. No express redistribution exception established.", "exactModel": true }, { "printerId": "elegoo-jupiter-2", "url": "https://www.elegoo.com/cdn/shop/files/JPT2.jpg?v=1775530749&width=345", "sourcePage": "https://www.elegoo.com/collections/3d-printing/products/elegoo-jupiter-2", "policyUrl": "https://www.elegoo.com/pages/terms-of-service", "credit": "ELEGOO", "notes": "Existing /assets/products/elegoo-jupiter-2.jpg. Same asset is identified by Jupiter 2 product-card alt text and product link. This is not Jupiter SE. No express redistribution exception established.", "exactModel": true }, { "printerId": "elegoo-mars-5-ultra", "url": "https://www.elegoo.com/cdn/shop/files/f91c887f39b07095c6453b328b4b84cd_89b6a8ea-eb64-49b7-a161-96c53389bb6d.jpg?v=1748253800&width=345", "sourcePage": "https://www.elegoo.com/collections/3d-printing/products/mars-5-ultra-9k-7inch-monochrome-lcd-resin-3d-printer", "policyUrl": "https://www.elegoo.com/pages/terms-of-service", "credit": "ELEGOO", "notes": "Existing /assets/products/elegoo-mars-5-ultra.jpg. Same asset is identified by Mars 5 Ultra product-card alt text and exact link. No express redistribution exception established.", "exactModel": true }, { "printerId": "heygears-ultracraft-reflex-rs", "url": "https://store.heygears.com/cdn/shop/files/printer-icon.webp?v=1732936774&width=640", "sourcePage": "https://store.heygears.com/products/ultracraft-reflex-rs-3d-printer", "policyUrl": "https://store.heygears.com/policies/terms-of-service", "credit": "HeyGears", "notes": "Existing /assets/products/heygears-ultracraft-reflex-rs.png. Official Reflex RS box-contents section labels the asset as the RS printer. No editorial-photo reuse permission established.", "exactModel": true }, { "printerId": "prusa-mk4s", "url": "https://assets.prusa3d.com/cdn-cgi/image/width=1200,height=1200,quality=85,format=auto/b944a8a7-93e6-49b8-8a4c-1a006dc7904a.png", "sourcePage": "https://www.prusa3d.com/p/prusa-3d-printers/", "policyUrl": "https://www.prusa3d.com/page/media-assets_987/", "credit": "Prusa Research", "notes": "Existing /assets/products/prusa-mk4s.png. Official lineup labels this asset Prusa MK4S. It was not identified inside the expressly granted general press archive; that archive's MK4 photo is a different model. Separate MK4S archive has no license/readme document. Rights remain unclear.", "exactModel": true }, { "printerId": "prusa-core-one-gen-2", "url": "https://assets.prusa3d.com/cdn-cgi/image/width=1200,height=1151,quality=85,format=auto/f1a912e3-b743-467d-abc6-cbd4959073a2.png", "sourcePage": "https://www.prusa3d.com/p/prusa-3d-printers/", "policyUrl": "https://www.prusa3d.com/page/media-assets_987/", "credit": "Prusa Research", "notes": "Existing /assets/products/prusa-core-one-gen-2.png. Official lineup uses this asset within the card headed CORE One+ (Gen 2), establishing the exact current model association. Separate older CORE One media-kit images were not substituted. No applicable reuse grant was established for this lineup asset.", "exactModel": true }, { "printerId": "eos-m-290", "url": "https://media.ffycdn.net/eu/eos-gmbh/P8WSJHv9VUuPsugBZ21V.png?width=3601", "sourcePage": "https://brandhub.eos.info/share/7ecpbXDqbBPnoCmAJwZo/collections/48/assets/2918", "policyUrl": "https://www.eos.info/press-media/press-center/media", "credit": "Source: EOS", "notes": "Permitted for the scoped editorial press use described in the EOS policy record. Official EOS media-kit link leads to EOS systems press media. Individual asset title: System_EOS_M_290_Front_noBg. The detail page displays PNG, 2.34 MB, 3601 x 3601, and the direct img src above. Exact base M 290, not M 290 1kW or M 290-2. No third-party copyright notice was displayed. Publication-copy request remains outstanding; no message was sent.", "exactModel": true }, { "printerId": "eos-p-396", "url": "https://media.ffycdn.net/eu/eos-gmbh/jik694ksKTJdLdKQv7Pi.png?width=10000", "sourcePage": "https://brandhub.eos.info/share/7ecpbXDqbBPnoCmAJwZo/collections/48/assets/2956", "policyUrl": "https://www.eos.info/press-media/press-center/media", "credit": "Source: EOS", "notes": "Permitted for the scoped editorial press use described in the EOS policy record. Individual asset title: System_EOS_P_396_Front_noBG. The detail page displays PNG, 3.59 MB, 10000 x 6268, and the direct img src above. This candidate is not used because the model is absent from the current catalog. No third-party copyright notice was displayed. Publication-copy request remains outstanding; no message was sent.", "exactModel": true }, { "printerId": "formlabs-form-4", "url": "https://formlabs.com/_next/image/?q=75&url=https%3A%2F%2Fformlabs-media.formlabs.com%2Ffiler_public%2F62%2Fd4%2F62d4c43b-7f4e-4e42-9de9-86b71edbfd24%2Fformlabs_f4_front_cover_closed_eng_light_ik_240321_store_noshadow.png&w=3840", "sourcePage": "https://formlabs.com/3d-printers/form-4/", "policyUrl": "https://formlabs.com/company/press/", "credit": "Formlabs — proposed attribution only; reuse permission not established", "notes": "Existing site photo audited at site/public/assets/products/formlabs-form-4.webp. Official page image link labels it Form 4 3D Printer, and the local raster visibly identifies Form 4. Exact model verified, but no affirmative reuse grant was found for this file. The separate Flickr CC program does not establish permission for this product-page file. Hold pending an exact asset grant or licensed replacement.", "exactModel": true }, { "printerId": "formlabs-fuse-1-plus-30w", "url": "https://formlabs.com/_next/image/?q=75&url=https%3A%2F%2Fformlabs-media.formlabs.com%2Ffiler_public%2F48%2F24%2F482464e8-9e4a-43a8-8d11-5c270b40c878%2Fformlabs_2021_fuse_002.png&w=3840", "sourcePage": "https://formlabs.com/3d-printers/fuse-1/", "policyUrl": "https://formlabs.com/company/press/", "credit": "Formlabs — proposed attribution only; reuse permission not established", "notes": "Existing site photo audited at site/public/assets/products/formlabs-fuse-1-plus-30w.webp. The current manufacturer page labels the linked image Fuse 1+ 30W, supporting its association, but the filename references 2021 and the visible cabinet does not identify the 30W variant. exactModel=false means the exact variant remains unverified, not that a mismatch was proven. No affirmative reuse grant was found for this file. Hold for both rights and exact-variant verification.", "exactModel": false }, { "printerId": "hp-jet-fusion-5600", "url": "https://www.hp.com/content/dam/sites/worldwide/printers/3d-printers/products/HP%20Jet%20Fusion%205600%203D%20Printing%20Solution%402x.jpg", "sourcePage": "https://www.hp.com/us-en/printers/3d-printers/products.html", "policyUrl": "https://www.hp.com/country/us/en/termsofuse.html", "credit": "HP — proposed attribution only; reuse permission not established", "notes": "Observed direct image href on the official comparison page beside the Jet Fusion 5600 heading and a matching model caption. Exact model is supported by manufacturer caption and URL, but image fetch returned an internal tool error, so raster contents were not visually inspected. No asset-specific grant was found; candidate only, not approved for use.", "exactModel": true }, { "printerId": "hp-jet-fusion-5200", "url": "https://www.hp.com/content/dam/sites/worldwide/printers/3d-printers/products/5210%203D%20Printing%20Solutions%20%402x.jpg", "sourcePage": "https://www.hp.com/us-en/printers/3d-printers/products.html", "policyUrl": "https://www.hp.com/country/us/en/termsofuse.html", "credit": "HP — proposed attribution only; reuse permission not established", "notes": "Observed direct image href beside the official Jet Fusion 5200 series caption, but the asset filename identifies 5210. Exact 5200 base-machine identity is not established. Image fetch returned an internal tool error. No asset-specific grant found; do not use as a verified 5200 photo.", "exactModel": false }, { "printerId": "hp-jet-fusion-5000", "url": "https://www.hp.com/content/dam/sites/worldwide/printers/3d-printers/products/HP%20Jet%20Fusion%205000.png", "sourcePage": "https://www.hp.com/us-en/printers/3d-printers/products.html", "policyUrl": "https://www.hp.com/country/us/en/termsofuse.html", "credit": "HP — proposed attribution only; reuse permission not established", "notes": "Observed direct image href on the official comparison page beside the Jet Fusion 5000 heading and a matching model caption. Exact model is supported by manufacturer caption and URL, but image fetch returned a cache-miss tool error, so raster contents were not visually inspected. No asset-specific grant found; candidate only, not approved for use.", "exactModel": true } ], "includedImages": [ { "printerId": "eos-m-290", "sourcePage": "https://brandhub.eos.info/share/7ecpbXDqbBPnoCmAJwZo/collections/48/assets/2918", "policyUrl": "https://www.eos.info/press-media/press-center/media", "credit": "Source: EOS", "license": "EOS editorial media-kit permission" }, { "printerId": "bambu-lab-x1-carbon", "sourcePage": "https://commons.wikimedia.org/wiki/File:Bambu_Lab_X1_Carbon_with_AMS_module.jpg", "policyUrl": "https://commons.wikimedia.org/wiki/File:Bambu_Lab_X1_Carbon_with_AMS_module.jpg", "credit": "Benlisquare / CC BY-SA 4.0 / Wikimedia Commons", "license": "CC BY-SA 4.0" }, { "printerId": "prusa-mk4", "sourcePage": "https://commons.wikimedia.org/wiki/File:Prusa_MK4.jpg", "policyUrl": "https://commons.wikimedia.org/wiki/File:Prusa_MK4.jpg", "credit": "Majkluss / CC BY-SA 4.0 / Wikimedia Commons", "license": "CC BY-SA 4.0" }, { "printerId": "prusa-mini-plus", "sourcePage": "https://commons.wikimedia.org/wiki/File:Prusa_Mini+.jpg", "policyUrl": "https://commons.wikimedia.org/wiki/File:Prusa_Mini+.jpg", "credit": "Klaus-Dieter Keller / CC0 1.0 / Wikimedia Commons", "license": "CC0 1.0" }, { "printerId": "makerbot-replicator-2", "sourcePage": "https://commons.wikimedia.org/wiki/File:MakerBot_-_Replicator_2_02.jpg", "policyUrl": "https://commons.wikimedia.org/wiki/File:MakerBot_-_Replicator_2_02.jpg", "credit": "Creative Tools / CC BY 2.0 / Wikimedia Commons", "license": "CC BY 2.0" }, { "printerId": "makerbot-cupcake-cnc", "sourcePage": "https://www.flickr.com/photos/bre/3458247336/", "policyUrl": "https://www.flickr.com/photos/bre/3458247336/", "credit": "Bre Pettis / CC BY 2.0", "license": "CC BY 2.0" }, { "printerId": "ultimaker-original", "sourcePage": "https://commons.wikimedia.org/wiki/File:Ultimaker_original_printer.jpg", "policyUrl": "https://commons.wikimedia.org/wiki/File:Ultimaker_original_printer.jpg", "credit": "ddurant123 / CC BY 2.0 / Wikimedia Commons", "license": "CC BY 2.0" }, { "printerId": "reprap-darwin", "sourcePage": "https://commons.wikimedia.org/wiki/File:RepRap_Darwin_4.jpg", "policyUrl": "https://commons.wikimedia.org/wiki/File:RepRap_Darwin_4.jpg", "credit": "ッ Zach Hoeken ッ / CC BY-SA 2.0 / Wikimedia Commons", "license": "CC BY-SA 2.0" }, { "printerId": "formlabs-form-2", "sourcePage": "https://www.flickr.com/photos/161389331@N04/32586713947/", "policyUrl": "https://www.flickr.com/photos/161389331@N04/32586713947/", "credit": "Formlabs Inc. / CC BY 2.0", "license": "CC BY 2.0" }, { "printerId": "prusa-i3-mk3s", "sourcePage": "https://www.prusa3d.com/page/media-assets_987/", "policyUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "credit": "(c) Prusa Polymers - prusa3d.com", "license": "Prusa package worldwide release permission" }, { "printerId": "prusa-sl1", "sourcePage": "https://www.prusa3d.com/page/media-assets_987/", "policyUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "credit": "(c) Prusa Polymers - prusa3d.com", "license": "Prusa package worldwide release permission" } ], "outOfCatalogCandidates": [ { "printerId": "eos-p-396", "decision": "not-used", "reason": "A specifically permitted official photo was found, but the model is not part of the current catalog." } ], "followUp": [ { "brand": "EOS", "action": "The media-kit page requests a copy of published coverage. Keep this as a publication follow-up; do not send a message without the user authorizing it.", "status": "not-sent-local-preview-only" } ], "editorialArtwork": { "hero": "AI-generated editorial illustration, not a photograph of a printer.", "history": "AI-generated conceptual artwork, not an archival photograph.", "fallbacks": "Locally drawn generic process illustrations explicitly labeled as not model likenesses; no generated product replicas were added." }, "initialManufacturerAuditDate": "2026-10-15", "openPhotoReview": { "checkedOn": "2026-10-16", "images": [ { "printerId": "bambu-lab-x1-carbon", "brand": "Bambu Lab", "model": "X1 Carbon", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/6/68/Bambu_Lab_X1_Carbon_with_AMS_module.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:Bambu_Lab_X1_Carbon_with_AMS_module.jpg", "credit": "Benlisquare / CC BY-SA 4.0 / Wikimedia Commons", "creator": "Benlisquare", "title": "Bambu Lab X1 Carbon with AMS module.jpg", "licenseName": "CC BY-SA 4.0", "licenseUrl": "https://creativecommons.org/licenses/by-sa/4.0/", "licenseVersion": "4.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:Bambu_Lab_X1_Carbon_with_AMS_module.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement.", "License adaptations of this image under the same or a compatible share-alike license. Retain the original license for the unmodified photo." ], "modelEvidence": "Creator description explicitly names Bambu Lab X1 Carbon with AMS module on top. Visual inspection: front label reads X1-Carbon; AMS module visible on top.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "AMS accessory is pictured; photo must not imply AMS is included with every configuration. CC BY-SA chosen from dual licensing.", "sha256": "4ade22ed106d39791bc5189d6b481a0b354dae5f58842439076de9f77a00549a", "visualReview": "confirmed", "bytes": 2612448 }, { "printerId": "prusa-mk4", "brand": "Prusa Research", "model": "Original Prusa MK4", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/f/f2/Prusa_MK4.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:Prusa_MK4.jpg", "credit": "Majkluss / CC BY-SA 4.0 / Wikimedia Commons", "creator": "Majkluss", "title": "Prusa MK4.jpg", "licenseName": "CC BY-SA 4.0", "licenseUrl": "https://creativecommons.org/licenses/by-sa/4.0/", "licenseVersion": "4.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:Prusa_MK4.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement.", "License adaptations of this image under the same or a compatible share-alike license. Retain the original license for the unmodified photo." ], "modelEvidence": "Creator describes Original Prusa MK4 printer, photographed 26 April 2023. Visual inspection: MK4 printed on extruder cover and LCD housing.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Does not represent MK4S.", "sha256": "a9a796708644c419881693c3ae964cc9b12ed8204e09e8b8a74a986212834592", "visualReview": "confirmed", "bytes": 3020533 }, { "printerId": "prusa-mini-plus", "brand": "Prusa Research", "model": "Original Prusa MINI+", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/c/ce/Prusa_Mini%2B.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:Prusa_Mini+.jpg", "credit": "Klaus-Dieter Keller / CC0 1.0 / Wikimedia Commons", "creator": "Klaus-Dieter Keller", "title": "Prusa Mini+.jpg", "licenseName": "CC0 1.0", "licenseUrl": "https://creativecommons.org/publicdomain/zero/1.0/", "licenseVersion": "1.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:Prusa_Mini+.jpg", "permissionQuote": "This file is made available under the Creative Commons CC0 1.0 Universal Public Domain Dedication.", "conditions": [], "modelEvidence": "Creator describes Prusa Mini+ printer in black. Visual review confirms black Prusa MINI family machine; exact plus variant is supported by the photographer caption, not assumed from generic product labeling.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Original MINI+; do not reuse for MINI without distinguishing the variant. Attribution is voluntarily retained.", "sha256": "1b6e67d32609b8da9917c0d77c7c0c50b8640824e33f3ae2d9045bcc9c0a0384", "visualReview": "confirmed", "bytes": 1062208 }, { "printerId": "makerbot-replicator-2", "brand": "MakerBot", "model": "Replicator 2", "originalUrl": "https://live.staticflickr.com/8514/8572278486_6905da05a7_o.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:MakerBot_-_Replicator_2_02.jpg", "credit": "Creative Tools / CC BY 2.0 / Wikimedia Commons", "creator": "Creative Tools", "title": "MakerBot - Replicator 2 02.jpg", "licenseName": "CC BY 2.0", "licenseUrl": "https://creativecommons.org/licenses/by/2.0/", "licenseVersion": "2.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:MakerBot_-_Replicator_2_02.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution 2.0 Generic license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement." ], "modelEvidence": "File caption explicitly MakerBot - Replicator 2; original Flickr source 8572278486. Visual inspection: MakerBot Replicator 2 model name visible on lower front.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Flickr license independently reviewed by Commons FlickreviewR 2 on 26 April 2025. Original photographer Flickr page was rechecked on 2026-10-16 and original bytes downloaded directly; title at original source: 02.", "sha256": "f4b0b2c8379e659b18d5f1de8d184bdb54e16a27e9a35bf7208453039a4be00d", "commonsOriginalUrl": "https://upload.wikimedia.org/wikipedia/commons/f/f5/MakerBot_-_Replicator_2_02.jpg", "originalPhotographerPage": "https://www.flickr.com/photos/33907867@N02/8572278486/", "originalTitle": "02", "visualReview": "confirmed", "bytes": 4241610 }, { "printerId": "makerbot-thing-o-matic", "brand": "MakerBot", "model": "Thing-O-Matic", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/8/87/Makerbot_Thing-O-Matic_Assembled_Printing_Blue_Rabbit.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:Makerbot_Thing-O-Matic_Assembled_Printing_Blue_Rabbit.jpg", "credit": "Makerbot Industries / CC BY 2.0 / Wikimedia Commons", "creator": "Makerbot Industries", "title": "Makerbot Thing-O-Matic Assembled Printing Blue Rabbit.jpg", "licenseName": "CC BY 2.0", "licenseUrl": "https://creativecommons.org/licenses/by/2.0/", "licenseVersion": "2.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:Makerbot_Thing-O-Matic_Assembled_Printing_Blue_Rabbit.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution 2.0 Generic license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement." ], "modelEvidence": "Photo description identifies Makerbot Thing-O-Matic printing a blue rabbit. Downloaded image visually inspected: Thing-O-Matic model name is visible on the front.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Original makerbot Flickr photo 5526691737; license reviewed on 1 February 2012. Original download later succeeded; local visual review completed.", "visualReview": "confirmed", "downloadStatus": "downloaded", "sha256": "257777c238d33b86e4cc6126897107d7bc9504b2dffeee5c16ac2a2df65e1a19", "bytes": 2901537 }, { "printerId": "makerbot-cupcake-cnc", "brand": "MakerBot", "model": "Cupcake CNC", "originalUrl": "https://live.staticflickr.com/3490/3458247336_9c1d2e1943_o.jpg", "sourcePage": "https://www.flickr.com/photos/bre/3458247336/", "credit": "Bre Pettis / CC BY 2.0", "creator": "Bre Pettis", "title": "MakerBot Glamour Shot", "licenseName": "CC BY 2.0", "licenseUrl": "https://creativecommons.org/licenses/by/2.0/", "licenseVersion": "2.0", "policyUrl": "https://www.flickr.com/photos/bre/3458247336/", "permissionQuote": "This file is licensed under the Creative Commons Attribution 2.0 Generic license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement." ], "modelEvidence": "Photographer description identifies final MakerBot Cupcake CNC design, kit 21, photographed 19 April 2009. Full assembled Cupcake CNC visibly shown.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Complete printer photograph replaces the unsuitable assembly-gathering candidate. Manufacturer cofounder and photographer Bre Pettis licenses this specific photo CC BY 2.0; file HTML and original bytes preserved. Printed object is an example, not included hardware.", "sha256": "19659b74c3a678dd612eb3597e26ff38bfbacf41a654ce3169dc948ad4f28e4d", "originalPhotographerPage": "https://www.flickr.com/photos/bre/3458247336/", "visualReview": "confirmed", "commonsEvidence": "https://commons.wikimedia.org/wiki/File:MakerBot_Glamour_Shot_-_Flickr_-_bre_pettis.jpg", "bytes": 3778454 }, { "printerId": "ultimaker-s5", "brand": "UltiMaker", "model": "S5", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/5/5f/The_Ultimaker_S5_Pro_Bundle.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:The_Ultimaker_S5_Pro_Bundle.jpg", "credit": "Slozova / CC BY-SA 4.0 / Wikimedia Commons", "creator": "Slozova", "title": "The Ultimaker S5 Pro Bundle.jpg", "licenseName": "CC BY-SA 4.0", "licenseUrl": "https://creativecommons.org/licenses/by-sa/4.0/", "licenseVersion": "4.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:The_Ultimaker_S5_Pro_Bundle.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement.", "License adaptations of this image under the same or a compatible share-alike license. Retain the original license for the unmodified photo." ], "modelEvidence": "Creator caption names Ultimaker S5 Pro Bundle displayed at TCT in September 2019. Downloaded image visually inspected: S5 Pro Bundle placard and matching machine with Air Manager and Material Station are visible.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "S5 printer is shown with Pro Bundle accessories. Label as S5 with optional Pro Bundle; do not imply pictured accessories are standard. Original download later succeeded; local visual review completed.", "visualReview": "confirmed", "downloadStatus": "downloaded", "sha256": "ddec51e0ad0f4941ded8336f86f3bac675aad8b1078e39647af7dca44f6bc3ab", "bytes": 106633 }, { "printerId": "ultimaker-original", "brand": "Ultimaker", "model": "Original", "originalUrl": "https://live.staticflickr.com/7125/6983684126_8cbc95d58d_o.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:Ultimaker_original_printer.jpg", "credit": "ddurant123 / CC BY 2.0 / Wikimedia Commons", "creator": "ddurant123", "title": "Ultimaker original printer.jpg", "licenseName": "CC BY 2.0", "licenseUrl": "https://creativecommons.org/licenses/by/2.0/", "licenseVersion": "2.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:Ultimaker_original_printer.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution 2.0 Generic license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement." ], "modelEvidence": "File caption names Ultimaker original printer, photo taken 29 May 2011.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Flickr license reviewed on 11 August 2025. Original wooden-frame printer; not Original+. Original photographer Flickr page was rechecked on 2026-10-16 and original bytes downloaded directly; title at original source: ultimaker.", "sha256": "1c007bbbbc2f1cc88c5551b189b84b80ec04b5366e93215149b96b6eb702cdb0", "commonsOriginalUrl": "https://upload.wikimedia.org/wikipedia/commons/3/3d/Ultimaker_original_printer.jpg", "originalPhotographerPage": "https://www.flickr.com/photos/52118225@N08/6983684126/", "originalTitle": "ultimaker", "visualReview": "confirmed", "bytes": 2386684 }, { "printerId": "ultimaker-2", "brand": "Ultimaker", "model": "2", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/b/bc/Ultimaker_2_with_finished_print.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:Ultimaker_2_with_finished_print.jpg", "credit": "Kadel3003 / CC BY-SA 4.0 / Wikimedia Commons", "creator": "Kadel3003", "title": "Ultimaker 2 with finished print.jpg", "licenseName": "CC BY-SA 4.0", "licenseUrl": "https://creativecommons.org/licenses/by-sa/4.0/", "licenseVersion": "4.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:Ultimaker_2_with_finished_print.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement.", "License adaptations of this image under the same or a compatible share-alike license. Retain the original license for the unmodified photo." ], "modelEvidence": "Creator filename identifies Ultimaker 2, photographed 1 April 2015 before later 2+ generation.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Photo includes a completed object on the build plate. Source file and license verified, but original binary download received HTTP 403/429 during this run; no local visual review completed.", "visualReview": "pending local image availability", "downloadStatus": "HTTP Error 429: Too many requests (f061ab2)" }, { "printerId": "reprap-darwin", "brand": "RepRap", "model": "Darwin", "originalUrl": "https://live.staticflickr.com/2072/2232455319_51cf91d5b2_o.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:RepRap_Darwin_4.jpg", "credit": "ッ Zach Hoeken ッ / CC BY-SA 2.0 / Wikimedia Commons", "creator": "ッ Zach Hoeken ッ", "title": "RepRap Darwin 4.jpg", "licenseName": "CC BY-SA 2.0", "licenseUrl": "https://creativecommons.org/licenses/by-sa/2.0/", "licenseVersion": "2.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:RepRap_Darwin_4.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution-Share Alike 2.0 Generic license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement.", "License adaptations of this image under the same or a compatible share-alike license. Retain the original license for the unmodified photo." ], "modelEvidence": "Creator description names RepRap Darwin; photograph dated 30 January 2008.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Flickr license reviewed on 27 September 2019. Original photographer Flickr page was rechecked on 2026-10-16 and original bytes downloaded directly; title at original source: DSC03184.JPG. Visual review: early cube-frame Darwin printer in a workshop with a person; retain context in history/editorial use.", "sha256": "0b1db568f61c6010aa576b367cd6a049db3efda14e4134ab274a2d27442da49e", "commonsOriginalUrl": "https://upload.wikimedia.org/wikipedia/commons/3/38/RepRap_Darwin_4.jpg", "originalPhotographerPage": "https://www.flickr.com/photos/hoeken/2232455319/", "originalTitle": "DSC03184.JPG", "visualReview": "confirmed", "bytes": 368144 }, { "printerId": "reprap-mendel", "brand": "RepRap", "model": "Mendel", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/0/06/RepRap_v2_Mendel.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:RepRap_v2_Mendel.jpg", "credit": "RepRap Project / CC BY-SA 4.0 / Wikimedia Commons", "creator": "RepRap Project", "title": "RepRap v2 Mendel.jpg", "licenseName": "CC BY-SA 4.0", "licenseUrl": "https://creativecommons.org/licenses/by-sa/4.0/", "licenseVersion": "4.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:RepRap_v2_Mendel.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement.", "License adaptations of this image under the same or a compatible share-alike license. Retain the original license for the unmodified photo." ], "modelEvidence": "File description explicitly names RepRap v2 Mendel, dated 19 November 2009.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "CC BY-SA 4.0 selected from offered multi-license options. Source file and license verified, but original binary download received HTTP 403/429 during this run; no local visual review completed.", "visualReview": "pending local image availability", "downloadStatus": "temporarily-unavailable-403-429" }, { "printerId": "formlabs-form-2", "brand": "Formlabs", "model": "Form 2", "originalUrl": "https://live.staticflickr.com/7802/32586713947_cd57ca3fa7_o.jpg", "sourcePage": "https://www.flickr.com/photos/161389331@N04/32586713947/", "credit": "Formlabs Inc. / CC BY 2.0", "creator": "Formlabs Inc.", "title": "Dental Lab 3D Printer Beside Printed Parts Made with a Formlabs Form 2 SLA", "licenseName": "CC BY 2.0", "licenseUrl": "https://creativecommons.org/licenses/by/2.0/", "licenseVersion": "2.0", "policyUrl": "https://www.flickr.com/photos/161389331@N04/32586713947/", "permissionQuote": "Free for use under Creative Commons license.", "conditions": [ "Credit the named creator and image title, and link to the source file page and license.", "Indicate any changes; do not imply endorsement.", "Include the requested attribution link to https://formlabs.com/industries/dental/crown-and-bridge-models/ (description text); its HTML target is https://formlabs.com/3d-printers/." ], "modelEvidence": "Official Formlabs Flickr photo title and description explicitly identify Formlabs Form 2 SLA printer in a dental lab.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Specific photo HTML links CC BY 2.0. Official account linked by Formlabs forum https://forum.formlabs.com/t/formlabs-images-now-available-under-creative-commons/22191 . Photo depicts printer and printed examples; no clinical performance claim.", "sha256": "35a06b45f134092bb7e0421385454e810d26256a3505ca56710ba22dfd430105", "visualReview": "confirmed", "bytes": 13623985 }, { "printerId": "prusa-i3-mk3s", "brand": "Prusa Research", "model": "Original Prusa i3 MK3S", "originalUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "sourcePage": "https://www.prusa3d.com/page/media-assets_987/", "credit": "(c) Prusa Polymers - prusa3d.com", "creator": "Prusa Polymers", "title": "mk3s02.jpg", "licenseName": "Prusa package worldwide release permission", "licenseUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "licenseVersion": null, "policyUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "permissionQuote": "All photos and logos in the package are ready for immediate release worldwide.", "conditions": [ "Use the exact prescribed credit: (c) Prusa Polymers - prusa3d.com.", "Permission is specific to files in this archive; do not extrapolate to other Prusa media kits.", "Use as an unmodified photo in editorial printer coverage; no trademark endorsement implied." ], "modelEvidence": "Official archive filename mk3s02.jpg and photographed LCD explicitly reads Prusa i3 MK3S OK.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "manufacturer-editorial-license", "notes": "Not a Creative Commons license. Express manufacturer release grant is in !credits-readme-first.txt, saved locally. originalUrl is ZIP container; exact unmodified file is research/open-image-evidence/mk3s02.jpg.", "archiveEntry": "mk3s02.jpg", "licenseEvidenceFile": "C:\\Users\\omeed\\Documents\\ChatGPT\\3Dprintsy\\research\\open-image-evidence\\!credits-readme-first.txt", "sha256": "8d286d09c58110c64ede76d8cdd3b71fed021414e4e529825cc41d04b3ac58f3", "visualReview": "confirmed", "bytes": 9705740 }, { "printerId": "prusa-sl1", "brand": "Prusa Research", "model": "Original Prusa SL1", "originalUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "sourcePage": "https://www.prusa3d.com/page/media-assets_987/", "credit": "(c) Prusa Polymers - prusa3d.com", "creator": "Prusa Polymers", "title": "sl101.jpg", "licenseName": "Prusa package worldwide release permission", "licenseUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "licenseVersion": null, "policyUrl": "https://www.prusa3d.com/downloads/press/prusaresearch.zip", "permissionQuote": "All photos and logos in the package are ready for immediate release worldwide.", "conditions": [ "Use the exact prescribed credit: (c) Prusa Polymers - prusa3d.com.", "Permission is specific to files in this archive; do not extrapolate to other Prusa media kits.", "Use as an unmodified photo in editorial printer coverage; no trademark endorsement implied." ], "modelEvidence": "Official archive filename sl101.jpg and visible product label ORIGINAL PRUSA SL1.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "manufacturer-editorial-license", "notes": "Not a Creative Commons license. Express manufacturer release grant is in !credits-readme-first.txt, saved locally. originalUrl is ZIP container; exact unmodified file is research/open-image-evidence/sl101.jpg.", "archiveEntry": "sl101.jpg", "licenseEvidenceFile": "C:\\Users\\omeed\\Documents\\ChatGPT\\3Dprintsy\\research\\open-image-evidence\\!credits-readme-first.txt", "sha256": "d2c4f214938b1684c175d4df1fad69d41c860a29c2963ee1fe8cbbaf643d3169", "visualReview": "confirmed", "bytes": 1816467 }, { "printerId": "creality-k1c", "brand": "Creality", "model": "K1C", "originalUrl": "https://live.staticflickr.com/65535/54049812322_4238ac638d_k.jpg", "commonsOriginalUrl": "https://upload.wikimedia.org/wikipedia/commons/6/6d/Creality_K1C_addons.jpg", "sourcePage": "https://www.flickr.com/photos/42537987@N07/54049812322/", "credit": "Mortymore (J. C. Barros) / CC BY 2.0 / Flickr", "creator": "Mortymore (J. C. Barros)", "title": "Creality K1C addons", "licenseName": "CC BY 2.0", "licenseUrl": "https://creativecommons.org/licenses/by/2.0/", "licenseVersion": "2.0", "policyUrl": "https://www.flickr.com/photos/42537987@N07/54049812322/", "permissionQuote": "CC BY 2.0", "conditions": [ "Credit the named creator and title, and link to the source page and license.", "Indicate any changes and do not imply endorsement." ], "modelEvidence": "Original photographer title identifies Creality K1C; caption lists K1C-specific add-ons. Browser visual inspection confirms K1C logo on the machine.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Photo shows a K1C with user-added tool holders, external spool holder and other accessories. Caption it as a printer with user modifications; do not imply these are stock equipment. Direct URL is the observed large Flickr rendition, not a claim that it is the full original-resolution file. Flickr original page explicitly links CC BY 2.0; Commons independently records FlickreviewR 2 verification on 2025-03-21.", "visualReview": "confirmed", "downloadStatus": "downloaded", "sha256": "be2fd5f4f77eb149897733b9c410f937a2c91b33ba2e3386ce40240c5a184b68", "bytes": 476988 }, { "printerId": "bambu-lab-p1s", "brand": "Bambu Lab", "model": "P1S", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/8/82/P1s_with_ams.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:P1s_with_ams.jpg", "credit": "Pineapplefish77 / CC BY-SA 4.0 / Wikimedia Commons", "creator": "Pineapplefish77", "title": "P1s with ams.jpg", "licenseName": "CC BY-SA 4.0", "licenseUrl": "https://creativecommons.org/licenses/by-sa/4.0/", "licenseVersion": "4.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:P1s_with_ams.jpg", "permissionQuote": "This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.", "conditions": [ "Credit the named creator and title, and link to the source page and license.", "Indicate any changes and do not imply endorsement.", "Distribute adaptations of this photo under the same or a compatible share-alike license." ], "modelEvidence": "Creator caption explicitly identifies P1S with AMS. Browser visual inspection shows the enclosed Bambu printer and AMS above it; caption is the primary exact-model identification.", "exactModel": true, "modifications": "none", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Own-work upload by Pineapplefish77 dated 2026-08-21, before audit date. Photo includes AMS accessory; do not imply it is included with every configuration. Original URL was read from the file page's Original file link; tracking parameters removed.", "visualReview": "confirmed", "downloadStatus": "downloaded", "sha256": "4e145790afe6d132d7219f5e0d25b7958dcea77837dc9b8c41a50e4e7995312d", "bytes": 799252 }, { "printerId": "bambu-lab-a1-mini", "brand": "Bambu Lab", "model": "A1 mini", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/1/1c/DG_%E6%9D%B1%E8%8E%9E_DongGuan_%E5%8D%97%E5%9F%8E%E5%8D%80_Nancheng_%E9%B4%BB%E7%A6%8F%E8%B7%AF_HongFu_Road_%E6%9D%B1%E8%8E%9E%E4%BA%AC%E6%9D%B1%E5%95%86%E5%A0%B4_JD_Mall_Electronics_Showroom_3D_printers_December_2024_R12S_06_%28cropped%29.jpg", "sourcePage": "https://commons.wikimedia.org/wiki/File:DG%20%E6%9D%B1%E8%8E%9E%20DongGuan%20%E5%8D%97%E5%9F%8E%E5%8D%80%20Nancheng%20%E9%B4%BB%E7%A6%8F%E8%B7%AF%20HongFu%20Road%20%E6%9D%B1%E8%8E%9E%E4%BA%AC%E6%9D%B1%E5%95%86%E5%A0%B4%20JD%20Mall%20Electronics%20Showroom%203D%20printers%20December%202024%20R12S%2006%20(cropped).jpg", "credit": "NAS 238 WMMNO; crop by Elmepi / CC0 1.0 / Wikimedia Commons", "creator": "NAS 238 WMMNO", "title": "DG 東莞 DongGuan 南城區 Nancheng 鴻福路 HongFu Road 東莞京東商場 JD Mall Electronics Showroom 3D printers December 2024 R12S 06 (cropped).jpg", "licenseName": "CC0 1.0", "licenseUrl": "https://creativecommons.org/publicdomain/zero/1.0/", "licenseVersion": "1.0", "policyUrl": "https://commons.wikimedia.org/wiki/File:DG%20%E6%9D%B1%E8%8E%9E%20DongGuan%20%E5%8D%97%E5%9F%8E%E5%8D%80%20Nancheng%20%E9%B4%BB%E7%A6%8F%E8%B7%AF%20HongFu%20Road%20%E6%9D%B1%E8%8E%9E%E4%BA%AC%E6%9D%B1%E5%95%86%E5%A0%B4%20JD%20Mall%20Electronics%20Showroom%203D%20printers%20December%202024%20R12S%2006%20(cropped).jpg", "permissionQuote": "This file is made available under the Creative Commons CC0 1.0 Universal Public Domain Dedication.", "conditions": [ "CC0 imposes no copyright attribution condition; retain creator, source and dedication link for provenance." ], "modelEvidence": "File description explicitly identifies a Bambu Lab A1 mini FFF printer. Browser visual inspection shows the cantilevered machine, bed, touchscreen, and visible A1 mini marking on the right of the gantry.", "exactModel": true, "modifications": "Existing Commons crop by Elmepi; no additional changes in this research.", "checkedOn": "2026-10-16", "basis": "cc-license", "notes": "Original photographer's own-work CC0 dedication is recorded on the file page. Crop history names Elmepi; current version enlarged the image area on 2026-08-29. Preview includes the machine as well as its PEI bed; showroom tubes and labels are visible. Direct original URL was observed, tracking parameters removed.", "visualReview": "confirmed", "downloadStatus": "downloaded", "sha256": "c699680a7a99abddf5a0f99aee6f3dc56ddf23bf9df896f89b03abb617f733a4", "bytes": 1081652 } ], "excluded": [ { "printerId": "bambu-lab-h2s", "sourcePage": "https://commons.wikimedia.org/wiki/File:3d_printer_Bambu_Lab_H2S.jpg", "reason": "Commons combines a 2025 photographer-created image with a US expired-copyright template and Flickr Public Domain Mark. No clear copyright-holder dedication established; omitted pending clarification." }, { "printerId": "prusa-mini", "sourcePage": "https://commons.wikimedia.org/wiki/File:Prusa_Mini.jpg", "reason": "CC0 is clear, but generic Prusa Mini caption from 2025 does not establish original MINI versus MINI+ hardware; omitted for exact-variant accuracy." }, { "printerId": "prusa-i3-mk2", "sourcePage": "https://commons.wikimedia.org/wiki/File:Prusa_i3_MK2.jpg", "reason": "Only GFDL 1.3+ verified; omitted from CC/CC0-first delivery to avoid extra license-copy obligations." }, { "printerId": "bambu-lab-a1", "sourcePage": "https://commons.wikimedia.org/wiki/File:DG%20%E6%9D%B1%E8%8E%9E%20DongGuan%20%E5%8D%97%E5%9F%8E%E5%8D%80%20Nancheng%20%E9%B4%BB%E7%A6%8F%E8%B7%AF%20HongFu%20Road%20%E6%9D%B1%E8%8E%9E%E4%BA%AC%E6%9D%B1%E5%95%86%E5%A0%B4%20JD%20Mall%20Electronics%20Showroom%203D%20printers%20December%202024%20R12S%2010.jpg", "reason": "Own-work CC0 license and A1 Commons category verified, but browser preview did not load and generic showroom caption does not itself establish the exact model. Not cleared for integration pending visual inspection.", "originalUrl": "https://upload.wikimedia.org/wikipedia/commons/c/ca/DG_%E6%9D%B1%E8%8E%9E_DongGuan_%E5%8D%97%E5%9F%8E%E5%8D%80_Nancheng_%E9%B4%BB%E7%A6%8F%E8%B7%AF_HongFu_Road_%E6%9D%B1%E8%8E%9E%E4%BA%AC%E6%9D%B1%E5%95%86%E5%A0%B4_JD_Mall_Electronics_Showroom_3D_printers_December_2024_R12S_10.jpg" }, { "printerId": "bambu-lab-a1", "sourcePage": "https://www.flickr.com/photos/ucdaviscoe/54251825562/", "reason": "Commons records CC BY2.0 and A1 category, but original Flickr page requires sign-in; caption only credits Mario Rodriguez/UC Davis. Did not establish exact model visually." }, { "printerId": "bambu-lab-p1s", "sourcePage": "https://commons.wikimedia.org/wiki/File:3D_Print_Timelapse_BambuLab_P1S.webm", "reason": "CC BY-SA4.0 by MDXDave, exact P1S caption, but is printing timelapse video rather than an external machine photograph. Not selected for catalog card." } ], "limits": [ "File-specific Creative Commons or archive permission does not license unrelated manufacturer images.", "Two researched historical candidates (Ultimaker 2 and RepRap Mendel) remain unserved after Wikimedia rate limiting prevented local visual review.", "Exact-model openly licensed photos were not established for every printer. Illustrated records remain labeled." ] } }